2003/04/14 Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276} Caterpillar


Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276}
`
2003/04/14 [SEPD0679]
FUEL SYSTEM
CONTROL GP-GOVERNOR
2003/04/14 Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276}
Wheel Skidders:
525B (S/N: 3KZ1-UP)
535B (S/N: AAE1-UP)

Description of Change: Larger bolts, locknuts and washers are now used on the engine bracket for the governor control cable in order to ensure proper alignment of the governor control cable.

Adaptable To:




Illustration 1g00993456

(1) 168-8366 Plate. (2) 8T-4189 Bolts. (3) 131-3540 Locknuts. (4) 8T-4224 Hard Washers .

The 8T-4189 Bolts (2), 131-3540 Locknuts (3) and 8T-4224 Hard Washers (4) are effective with the 525B (S/N: 3KZ1015-UP) Wheel Skidders and 535B (S/N: AAE614-UP) Wheel Skidders.

The 8T-4189 Bolts (2), 131-3540 Locknuts (3) and 8T-4224 Hard Washers (4) are adaptable to first production of the machines that are listed. The existing 8T-4138 Bolts, 6V-7743 Locknuts and 9X-8256 Washers can be removed and replaced with the new parts. Refer to Table 1.

Table 1
Qty     New Parts    
2     8T-4189 Bolts    
2     131-3540 Locknuts    
4     8T-4224 Hard Washers    

Information System:

IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
525B and 535B Wheel Skidders Lifting and Tying Down the Machine
953C Track-Type Loader Engine Oil and Filter - Change
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
953C Track-Type Loader Engine Oil Level - Check
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073}
525D, 535D, 545D, 555D Wheel Skidder Grapple Snubber - Inspect/Adjust
525B and 535B Wheel Skidders Additional Messages
525B and 535B Wheel Skidders Safety Messages
924G and 924GZ Wheel Loaders Machine Systems Main Control Valve - Assemble
924G and 924GZ Wheel Loaders Machine Systems Main Control Valve - Disassemble
3126B Engine for Caterpillar Built Machines System Configuration Parameters
973K Track-Type Loader Final Drive Oil - Change
D6N Track-Type Tractor Power Train Brake Control Valve - Disassemble
D6N Track-Type Tractor Power Train Brake Control Valve - Assemble
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install
AD30 Underground Articulated Truck Hydraulic Tank Screen - Clean
AD30 Underground Articulated Truck Reference Material
990 Series II Wheel Loader Machine Systems Bucket - Remove
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
Installation of High Intensity Discharge Lights{1434}
Supplement for the 973C Track-Type Loader With the Steel Mill Arrangement{7000}