2003/06/16 A New Accumulator Is Now Used {1805, 1808, 7320} Caterpillar


A New Accumulator Is Now Used {1805, 1808, 7320}
`
2003/06/16 [SEPD0687]
OPERATOR STATION
AIR CONDITIONER GP
2003/06/16 A New Accumulator Is Now Used {1805, 1808, 7320}
Wheel Loader:
924G (S/N: AAN1-UP; 9SW1-UP; 3PZ1-UP)
924GZ (S/N: AAB1-UP; 6YW1-UP; 3DZ1-UP)

Description of Change: The accumulator for the 149-0719 Air Conditioner Lines Group has been changed. The new accumulator is 17 mm (0.67 inch) longer than the previous accumulator. Two new hoses and a new mounting bracket are needed in order to replace the existing accumulator with the new service replacement part. The new mounting bracket allows the accumulator to be mounted away from the engine manifold.

Adaptable To: The 186-6190 Refrigerant Accumulator is a direct replacement for the 152-2823 Refrigerant Accumulator. The 176-3900 Air Conditioner Accumulator Group is the service replacement part for the 152-2823 Refrigerant Accumulator. The 176-3900 Air Conditioner Accumulator Group is the service replacement part for the 186-6190 Refrigerant Accumulator. The 176-3900 Air Conditioner Accumulator Group is adaptable to machines that are listed in Table 2. Refer to Table 3 for parts that are required in order to install the 176-3900 Air Conditioner Accumulator Group onto machines that are listed in Table 2.

Table 1
Machines That Are Equipped with the 186-6190 Refrigerant Accumulator    
924G     (S/N: AAN1010-UP; 9SW1844-UP; 3PZ1265-UP)    
924GZ     (S/N: AAB446-UP; 6YW803-UP; 3DZ831-UP)    

Table 2
Machines That Are Equipped with the 152-2823 Refrigerant Accumulator    
924G     (S/N: AAN1-1009; 9SW1-1843; 3PZ1-1264)    
924GZ     (S/N: AAB1-445; 6YW1-802; 3DZ1-830)    

Table 3
Required Parts for Service Replacement    
Quantity     Part Number     Description    
1     176-3900     Air Conditioner Accumulator Group    
1     210-8487     Bracket As    
1     204-7855     Hose As    
1     206-9961     Hose As    

Information System:

3044C Industrial Engine and Engines for Caterpillar Built Machines Piston and Rings
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Steering Wheel - Remove and Install
953C Track-Type Loader Specifications
994D Wheel Loader Power Train Pump Drive (Rear) - Assemble
Repair Procedure for the Upper Hitch Assembly{7057, 7100}
651E and 657E Wheel Tractor-Scrapers Hydraulic System Control Valve (Push-Pull)
651E and 657E Wheel Tractor-Scrapers Hydraulic System Cushion-Hitch Circuit
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
980G Wheel Loader Power Train Transmission Planetary - Assemble - Standard
TH220B, TH330B and TH340B Telehandlers Boom Wear Pad Clearance - Inspect/Adjust
980G Wheel Loader Power Train Transmission Planetary - Disassemble - Standard
2003/03/24 A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
D6N Track-Type Tractor Machine Systems Bulldozer (VPAT) - Remove
D6N Track-Type Tractor Machine Systems Bulldozer (VPAT) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Steering Cylinder - Remove and Install
953C Track-Type Loader Safety Messages - Arrangement 1
2003/03/31 Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Accumulator - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Accumulator Charging Valve (Brake) - Remove and Install
651E and 657E Wheel Tractor-Scrapers Hydraulic System Operational Checks
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator - Remove
D6N Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove
D6N Track-Type Tractor Machine Systems Bulldozer C-Frame - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator - Install