2003/04/21 Correction to Parts Manuals , "175-3094 Clutch and Gear Group (Third and Fourth)" {3061, 3155} Caterpillar

Telehandler:

TH62 (S/N: 4TM2303-UP)

TH63 (S/N: 5WM3797-UP)

TH82 (S/N: 3JN791-UP)

TH83 (S/N: 3RN2387-UP)

Parts Manual, SEBP2352, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3130, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3088, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3132, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3087, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3131, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3089, "175-3094 Clutch and Gear Gp (Third and Fourth)"Parts Manual, SEBP3133, "175-3094 Clutch and Gear Gp (Third and Fourth)"

The part number and the quantity in item (17) is incorrect. The part number in item (20) is incorrect. Refer to the following illustration and the chart for the correct part numbers and quantities in the 175-3094 Clutch and Gear Group.

Illustration 1	g00986892

Table 1

Serviced Parts of the 175-3094 Clutch and Gear Group (Third and Fourth)
Item	Qty	Part Number	Description
1	1	176-3288	Shaft As
2	1	176-3289	Bearing
3	1	176-3292	Bearing As
4	1	176-3291	Washer
5	1	8I-4526	Sleeve
6	1	8I-4525	Screw
7	2	8I-4498	Piston Rings
8	2	176-3293	Pistons
	1	8I-4490	Piston Seal
	1	8I-4491	Piston Seal
9	11	8I-4484	Clutch Discs
10	11	8I-4483	Clutch Discs
11	2	8I-4482	End Plates
12	2	8I-4481	Snap Rings
13	2	8I-4488	Wear Plates
14	2	8I-4487	Spring Washers
15	2	8I-4486	Retainer Rings
16	2	8I-4485	Snap Rings
17	2	176-3301	Bearings
18	8	176-3295	Washers
19	5	176-3374	Snap Rings
20	1	176-3298	Gear
	2	176-3301	Bearing
	1	176-3300	Spacer
21	1	176-3297	Gear
22	1	176-3299	Gear
23	2	204-3176	Needle Bearing As