Correct Mirror Orientation for Certain Landfill Compactors, Wheel Dozers, and Wheel Loaders {7319}
`
2014/09/18
[SEPD1853]
OPERATOR STATION
MIRROR GP
2014/09/18
Correct Mirror Orientation for Certain Landfill Compactors, Wheel Dozers, and Wheel Loaders {7319}
- Landfill Compactor:
- 836K (S/N: TWZ1-UP)
- Wheel Dozer:
- 834K (S/N: LWY1-UP; TWY1-UP)
- Wheel Loader:
- 988K (S/N: LWX1-UP; TWX1-UP)
The 214-0647 Mirror As or 200-1173 Mirror As may be oriented incorrectly, 180 degrees out of position. The mirrors will have reduced visibility.
Show/hide table
 | |
| Illustration 1 | g03723086 |
Correct Orientation | |
Show/hide table
 | |
| Illustration 2 | g03723097 |
Incorrect Orientation | |
Show/hide table
 | |
| Illustration 3 | g03714456 |
(A) Proper location of supplier name | |
Inspect the position of the mirror. If there is a supplier name on the back of the mirror, the name should be oriented inward towards the cab. From the platform the mirror should appear centered on the vertical mounting tube. If the mirror is offset to the inside of the vertical mounting tube, then the mirror should be rotated 180 degrees. If equipped with the heated mirror the wiring harness will need to be adjusted as required.
Information System:
C3.4B Engines
DEF Tank Sensor - Test
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Torque Converter
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Suction Fan
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Suction Fan
R2900G Load Haul Dump Braking System
Service Brake System Pressure - Test
Installation Procedure for the <NOBR>457-4026</NOBR> Lines Gp - Coupler on Certain Wheel Loaders {0679, 5057, 5133, 5491, 6129, 7050}
Installation Procedure for the <NOBR>457-4024</NOBR> Lines Gp - Coupler on Certain Wheel Loaders {0679, 5057, 5133, 5491, 6129, 7050}
D6N Track-Type Tractor Electrohydraulic System
Diagnostic Trouble Codes
Instructions for Repairing the Rollover Protection Group on Certain H Series Wheel Tractor-Scrapers{7301}
C4.4 Engines
DEF Pressure Is High
631K and 637K Wheel Tractor-Scraper Systems
Pump Control Valve (Cushion-Hitch) - Test and Adjust
950 GC Wheel Loader Power Train
Transmission Oil Pump - Install
2014/09/11
Cat Reman Now Offers New Turbocharger and Cartridge Groups for Certain Machine Engines {1052, 1053}
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Planetary
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Position Sensor (Left Brake Pedal) - Calibrate
950 GC Wheel Loader Power Train
Transmission and Torque Converter - Separate
631K and 637K Wheel Tractor-Scraper Systems
Relief Valve (Steering Cylinder Crossover) - Test and Adjust
D7E Track-Type Tractor Systems
Additional Electrical Components
D4, D6K2 and D6K Track-Type Tractor Systems
Additional Electrical Components
New Tube Assembly for the Low-Pressure Fuel System on Certain C6.6 Machine Engines{1261, 1274}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems
Hydraulic Tank - Disassemble
631K and 637K Wheel Tractor-Scraper Systems
Steering System Pressure - Test and Adjust
2014/11/27
An Improved Blower Assembly in the Air Conditioner Group Is Now Used on Certain Wheel Loaders {7320}
D7E Track-Type Tractor Systems
HVAC System