2014/11/25 Improved Bolted Joint for Rear Engine Mounts is Now Used On Certain Wheel Tractor Scrapers {1152, 1154} Caterpillar


Improved Bolted Joint for Rear Engine Mounts is Now Used On Certain Wheel Tractor Scrapers {1152, 1154}
`
Wheel Tractor-Scraper:
621H (S/N: DBK1-UP; HKK1-UP; NYY1-UP; EAZ1-UP)
621K (S/N: WTA1-UP; WTE1-UP; WTL1-UP; WTP1-UP)
623H (S/N: EJD1-UP; DBF1-UP)
623K (S/N: WTB1-UP; WTM1-UP)
627H (S/N: LCT1-UP; DBW1-UP)
627K (S/N: WTC1-UP; WTN1-UP)

Description of Change: Improved bolted joint for the rear engine mounts is now used on the machines listed above. The improved joint has a longer bolt, hardened washer, and friction shims which provide better robustness to the joints and extend the service life.

Adaptable To:

Table 1
New Parts List    
Item     Quantity     Part Number     Description    
1     1     174-9692     Spacer    
2     1     7X-0369     Bolt    

Secure engine mount to the flywheel housing using new spacer (1) and new bolt (2). Apply red Loctite 263 to the threads of the bolts before assembly.

New spacer (1) and new bolt (2) are adaptable to machines and effective in production with machines that are listed in Table 2.

Table 2
Sales Model     Adaptable to Machines     Effective in production with Machines    
627H     S/N:DBW1-UP     -    
S/N:LCT1-UP -    
623H     S/N:DBF1-UP     -    
S/N:EJD1-UP -    
621H     S/N:DBK1-UP     -    
S/N:EAZ1-UP -    
S/N:HKK1-UP -    
S/N:NYY1-UP -    
621K     S/N:WTA1-109     S/N:WTA110-UP    
S/N:WTL1-101 S/N:WTL102-UP    
S/N:WTE1-104 S/N:WTE105-UP    
S/N:WTP1-103 S/N:WTP104-UP    
623K     S/N:WTB1-127     S/N:WTB128-UP    
S/N:WTM1-104 S/N:WTM105-UP    
627K     S/N:WTC1-147     S/N:WTC148-UP    
S/N:WTN1-103 S/N:WTN104-UP    



Illustration 1g03717716



Illustration 2g03717717

View of area A

Table 3
New Parts List    
Item     Quantity     Part Number     Description    
1     1     174-9692     Spacer    
2     1     7X-0369     Bolt    
3     2     466-7518     Shim    

For machines HKK and NYY equipped with 380-9794 Tractor Conversion Ar, use new parts that are listed in Table 3 to secure engine mount to the flywheel housing. Apply red Loctite 263 to the threads of the bolts before assembly.

For machine WTE equipped with 453-8535 Steel Mill Ar, use new parts that are listed in Table 3 to secure engine mount to the flywheel housing. Apply red Loctite 263 to the threads of the bolts before assembly.

For machine WTP equipped with 453-8536 Steel Mill Ar, use new parts that are listed in Table 3 to secure engine mount to the flywheel housing. Apply red Loctite 263 to the threads of the bolts before assembly.

Information System:

631K and 637K Wheel Tractor-Scraper Systems Service Brake System Pressure - Test
966M and 972M Wheel Loaders DEF Manifold Filters - Replace
D8T Track-Type Tractor Power Train Track Roller Frame - Remove and Install
631K and 637K Wheel Tractor-Scraper Systems Parking Brake - Test and Adjust
C3.4B Engines DEF Tank Temperature Is Low
631K and 637K Wheel Tractor-Scraper Systems Brake Accumulator Charging Valve - Test
621K OEM Wheel Tractor-Scraper Connector Contact Description
621K OEM Wheel Tractor-Scraper Wiring Harness (Short Circuit) - Test
621K OEM Wheel Tractor-Scraper Wiring Harness (Open Circuit) - Test
621K OEM Wheel Tractor-Scraper Switch Circuits - Test
621K OEM Wheel Tractor-Scraper Solenoid Valve - Test
621K OEM Wheel Tractor-Scraper Sensor Supply - Test
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Transmission Pressures - Test and Adjust
950 GC Wheel Loader Power Train Tire and Rim (Front) - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Winch Operation
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Secondary Steering Pump and Electric Motor - Remove and Install
Installation Procedure for the <NOBR>454-2353</NOBR> Lines Gp - Coupler on Certain Wheel Loaders {0679, 5057, 5133, 5491, 6129, 7050}
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Control Manifold (Brake, Pilot, Fan) - HMU Steering
D4, D6K2 and D6K Track-Type Tractor Systems Bank Valve (Implement)
950M and 962M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Oil Filter (Power Train)
950 GC Wheel Loader Power Train Tire and Rim (Rear) - Remove and Install
D7E Track-Type Tractor Voltage Sensor - Test
950 GC Wheel Loader Power Train Oscillating Axle (Rear) - Remove and Install
C3.4B Engines Coolant Temperature Is Low