A New Steering Filter Cover is Now Used {4304, 5068}
`
2009/09/30
[SEPD1012]
2009/09/30
Water Pump Operation {1361, 7555}
2009/09/30
New AccuGrade Software Version 11.10-B is Now Available {7220}
STEERING SYSTEM
LINES GP
2009/09/30
A New Steering Filter Cover is Now Used {4304, 5068}
- Underground Articulated Truck:
- AD45B (S/N: CXM1-UP)
Description of Change: The cover can prevent hot oil coming into contact with hot engine components.
Adaptable To:
Show/hide table
| Model | Effective with | Adaptable to |
|---|---|---|
| AD45B | S/N:CXM426-UP | S/N:CXM1-425 |
Show/hide table
| Parts Required | ||
| Qty | Part Number | Description |
| 1 | 338-6538 | Cover |
| 3 | 5P-1075 | Hard Washer |
Procedure To Install 338-6538 Cover
- Move the machine to a hard, level surface, that is away from operating machines and away from personnel.
- Engage the parking brake. Place wheel blocks in front of the wheels and behind the wheels.
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Stop the engine.
- Turn the disconnect switch to the OFF position.
- Remove three bolts (1) and the washers. Retain three bolts (1) for installation purposes. Discard the washers.
Show/hide table
 | |
| Illustration 1 | g01978739 |
- Install 338-6538 Cover (2), three 5P-1075 Hard Washers, and three bolts (1) retained in Step 6.
Show/hide table
 | |
| Illustration 2 | g01978737 |
Information System:
Frozen Water Damages the Radiator Guard{7155}
C27 and C32 Engines for Caterpillar Built Machines
Component Location
2009/09/30
Water Pump Operation {1361, 7555}
2009/09/30
Water Pump Operation {1361, 7555}
AD30 Underground Articulated Truck
Additional Messages
2010/01/22
Improved Track Rollers Are Now Used On the D10T {4180}
2009/10/29
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/09/21
A Guard For the Pivot Shaft Seal Is Now Used On the D11T {4151}
953D, 963D and 973D Track-Type Loaders Monitoring System
Electrical Connector - Inspect
2009/09/28
Replacement Of The Gasket For The Rear Transmission Cover {3030, 7555}
2009/10/16
Correction to Systems Operation Testing and Adjusting , "Pressure Reducing Valve (Pilot Oil) - Test and Adjust" {5117}
AD30 Underground Articulated Truck
Lifting and Tying Down the Machine
3500B and 3500C Marine Engines
Turbocharger
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Declaration of Conformity
3500B and 3500C Auxiliary Engines, Generator Set Engines, and Generator Sets
Plate Locations and Film Locations
988H Wheel Loader Electrohydraulic System
System Schematic
Procedure To Increase The Serviceability Of The Air Cleaner On D7G2 Machines That Are Equipped With A 273-9225 Engine Enclosure Group Or A 291-5668 Engine Enclosure Group {1051}
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Lift Cylinder - Remove and Install
986H Wheel Loader
Camera - If Equipped
Orientation of the 285-4106 Valve Cover Seal and the 217-5701 Bulk Seal {1107}
2009/09/30
New AccuGrade Software Version 11.10-B is Now Available {7220}
(Custom) 356-2124 Fusion Pallet Fork
Declaration of Conformity
A System Malfunction on the Blade Float on Certain Track-Type Tractor Differential Steering{5057}
930G Wheel Loader Machine Systems
Piston Pump (Steering, Implement, Pilot) - Disassemble