Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
`
2009/10/29
[SEPD1028]
2009/10/29
A Procedure is Now Available In Order to Improve the Lock Assembly on the Rear Guard {7187}
2009/10/29
Recommendations to Help Eliminate Rust and Pitting on Hydraulic Cylinder Rods During Machine Storage On Certain Caterpillar Products {0355, 7000}
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
2009/10/29
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
- Motor Grader:
- 140H (S/N: XZH1-UP)
- Off-Highway Truck/Tractor:
- 773F (S/N: EED1-UP)
- Quarry Truck:
- 775F (S/N: DLS1-UP)
- Track-Type Tractor:
- D8R (S/N: 9EM1-UP)
- Underground Articulated Truck:
- AD55B (S/N: JNW1-UP)
- Wheel Dozer:
- 844H (S/N: BTW1-UP)
- Wheel Loader:
- 980H (S/N: MHG1-UP; JMS1-UP)
- Wheel Tractor-Scraper:
- 615CSeries II (S/N: 9XG1-UP)
- 140H (S/N: 5HM1-UP)
- 24M (S/N: B9K1-UP)
- 777F (S/N: JRP1-UP)
- D8T (S/N: J8B1-UP; KPZ1-UP)
- 988H (S/N: BXY1-UP)
- 990H (S/N: BWX1-UP)
Description of Change:
Note: This article addresses Continuous Product Improvement (CPI) issues:
183810193442
A improved gasket is now used for the oil filter base on the engines of the machines that are listed above. The gasket improves sealing by utilizing different materials and a thicker gasket.
Adaptable To:
Show/hide table
 | |
| Illustration 1 | g01975941 |
(1) Locations of the gasket | |
Show/hide table
 | |
| Illustration 2 | g01976895 |
(2) 2P-4305 Gasket (3) Rubber bead | |
Show/hide table
 | |
| Illustration 3 | g01976914 |
The improved 2P-4305 Gasket is the latest change level of the listed part number. Be sure that the gasket that is ordered looks like the gasket in Illustration 2 and in Illustration 3. The improved gasket is adaptable back to the first production of the listed engines.
Information System:
2009/09/21
A Guard For the Pivot Shaft Seal Is Now Used On the D11T {4151}
953D, 963D and 973D Track-Type Loaders Monitoring System
Electrical Connector - Inspect
2009/09/28
Replacement Of The Gasket For The Rear Transmission Cover {3030, 7555}
2009/10/16
Correction to Systems Operation Testing and Adjusting , "Pressure Reducing Valve (Pilot Oil) - Test and Adjust" {5117}
AD30 Underground Articulated Truck
Lifting and Tying Down the Machine
C13, C15, and C18 Tier 4 Interim Engines
ARD Failed to Ignite
992K Wheel Loader Electrohydraulic System
MID 082 - CID 1571 - FMI 11
992K Wheel Loader Electrohydraulic System
MID 082 - CID 0590 - FMI 14
992K Wheel Loader Electrohydraulic System
MID 082 - CID 2360 - FMI 04
3500 Engines
Housing (Front)
992K Wheel Loader Electrohydraulic System
MID 082 - CID 0463 - FMI 11
992K Wheel Loader Electrohydraulic System
MID 082 - CID 0463 - FMI 06
2010/01/22
Improved Track Rollers Are Now Used On the D10T {4180}
AD30 Underground Articulated Truck
Additional Messages
2009/09/30
Water Pump Operation {1361, 7555}
2009/09/30
Water Pump Operation {1361, 7555}
C27 and C32 Engines for Caterpillar Built Machines
Component Location
Frozen Water Damages the Radiator Guard{7155}
2009/09/30
A New Steering Filter Cover is Now Used {4304, 5068}
3500B and 3500C Marine Engines
Turbocharger
(Custom) 367-7349 and Quick Coupler For Wheel Loaders
Declaration of Conformity
3500B and 3500C Auxiliary Engines, Generator Set Engines, and Generator Sets
Plate Locations and Film Locations
988H Wheel Loader Electrohydraulic System
System Schematic
Procedure To Increase The Serviceability Of The Air Cleaner On D7G2 Machines That Are Equipped With A 273-9225 Engine Enclosure Group Or A 291-5668 Engine Enclosure Group {1051}