2009/09/30 Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines {1306, 7555} Caterpillar


Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines {1306, 7555}
`
2009/09/30 [SEPD1012]
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
2009/09/30 Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines {1306, 7555}
Articulated Truck:
725 (S/N: B1L1-UP)
730 (S/N: B1M1-UP)
730 EJECTOR (S/N: B1W1-UP)
Excavator:
345C (S/N: TBA1-UP; ESD1-UP; WDE1-UP; TDG1-UP; TAJ1-UP; DHP1-UP; M2R1-UP; PJW1-UP; BWY1-UP)
Motor Grader:
16M (S/N: B9H1-UP)
Reclaimer Mixer:
RM-300 (S/N: BWR1-UP)
Track-Type Tractor:
D8N (S/N: 9TC1-UP)
Wheel Loader:
966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)
972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
980C (S/N: 2XD1-UP; 63X1-UP)
980F (S/N: 3HK1-UP)
Service Magazine, SEPD1006, July 2009, "Changes to the Gasket for the Engine Oil Filter Base on Some C11 and C13 Engines". Disregard this article. Refer to the article that follows.

Description of Change: The gaskets that are used on engine oil filter bases that may have a single engine oil filter or dual engine oil filters have changed. Features for bolt retention have been added to the gasket in order to aid proper assembly. Also, a tab with the gasket's part number has been added to the latest version of the gasket. The gasket has a black tab with the white part number or a white tab with a black part number. The new tab with the part number is clearly visible when the gasket is installed.

Adaptable To: The gasket is adaptable back to the first production of the engines in the machines that are listed above. If there is a leak at the engine oil filter base, install one of the gaskets that are listed in Table 1.

Table 1
Number of Oil Filters     New Part Number     Former Part Number    
Dual     227-4892 (1) (2)     227-4892    
Single     336-2216 (1)     237-9751    
( 1 ) The part number of the gasket has not changed. The previous version of the gasket can be used.
( 2 ) This gasket has a black tab with white numbering.
( 1 ) This gasket has a white tab with black numbering.

Information System:

3500 Engines Turbocharger - Remove
3500 Engines Fuel Priming Pump - Remove and Install
Procedure to Install an Improved Harness for the Battery Isolation Control{1402, 1408, 1411}
Procedure to Install an Improved Harness for the Battery Isolation Control{1402, 1408, 1411}
D6N Track-Type Tractor Declaration of Conformity
973D Track-Type Loader Power Train Brake System
2009/07/06 New AMOCS Seals That Are Between the Radiator Core and the Tank Are Now in Production on D10T Track-Type Tractors and D11T Track-Type Tractors {1353}
D7E Track-Type Tractor Power Train Systems Brake Does Not Release
A Film Is Missing for the Equalizer Bar End Plug{7206, 7557}
973D Track-Type Loader Power Train Track Roller Frame
C9.3 Engine for Caterpillar Built Machines Cylinder Head Valves
2009/07/20 Improved Sun Gears and Planetary Gears Are Now Used in the Second Reduction of the D11R and the D11T Final Drive {4050}
D7E Track-Type Tractor Power Train Systems Power Train Oil Temperature Is High
3500 Engines Turbocharger - Install
973D Track-Type Loader Power Train Tracks
2009/07/06 An Improved Autolube Line is Now Used for 990 Series II and 990H Machines {7510, 7540}
2009/10/29 A Procedure is Now Available In Order to Improve the Lock Assembly on the Rear Guard {7187}
C11, C13, C15, and C18 Industrial Engines Crankcase Pressure Is Low
C9.3 Engines for Caterpillar Built Machines Relay (ARD Nozzle Heater) - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install
Failures of the Axle Oil Cooler in Cold Weather{1365, 3016}
C9.3 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
973D Track-Type Loader Power Train Electrical Output Components
973D Track-Type Loader Power Train Hydraulic Block