A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
`
2009/08/17
[SEPD1005]
COOLING SYSTEM
RADIATOR GP
2009/08/17
A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
- Wheel Tractor-Scraper:
- 631G (S/N: DFA1-UP)
- 637G (S/N: DFJ1-UP)
ReferenceSpecial Instruction, REHS4241, "Rework Procedure To Update the Radiator Group"
Description of Change: A new baffle, a new bracket, and new seals are now used on certain Wheel Tractor-Scrapers. The new baffle, a new bracket, and new seals will prevent rocks from being directed or entering the area of the fan on the machine. This change will prevent leaks that are caused by small rocks that are deflected off the fan into the radiator core.
Adaptable To: The new bracket and new seals are adaptable to the following machines in Group 1:
- 637G (S/N: DFJ394-408)
- 637G (S/N: DFJ409-UP)
Show/hide table
Required Parts for Group 1     | ||
Qty     | New Part     | Description     |
3     | 223-8985     | Radiator Core As (1)     |
6     | 272-5438     | Radiator Seal (1)     |
80 cm (31.496 inch)     |
333-9632     | Seal     |
1     | 5P-6126     | Seal     |
8     | 8T-4195     | Bolt     |
1     | 332-3618     | Bracket     |
Show/hide table
( 1 ) | This is an optional part. |
- 631G (S/N: DFA125-364)
- 637G (S/N: DFJ225-393)
- 631G (S/N: DFA365-UP)
Show/hide table
Required Parts for Group 2     | ||
Qty     | New Part     | Description     |
1     | 332-7600     | Baffle     |
10     | 139-3785     | Pop Rivet     |
3     | 223-8985     | Radiator Core As (1)     |
6     | 272-5438     | Radiator Seal (1)     |
80 cm (31.496 inch)     |
333-9632     | Seal     |
1     | 5P-6126     | Seal     |
8     | 8T-4195     | Bolt     |
1     | 332-3618     | Bracket     |
Show/hide table
( 1 ) | This is an optional part. |
ReferenceFor specific instructions, refer to the following service information. Special Instruction, REHS4241, "Rework Procedure To Update the Radiator Group"
Information System:
2009/06/15
Selection of Wire Rope and Use for PACCAR Winches {5163}
2010/05/27
An Improved Oil Supply Line for the Turbocharger Is Used on Some Track-Type Tractors {1052, 1307}
2009/06/08
An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310}
D6T Track-Type Tractor Hydraulic System
Piston Pump (Fan Drive)
973 K Track-Type Loaders
Hydraulic Manifold (Bank Valve Outlet)
973 K Track-Type Loaders
Control Valve (Ripper)
2009/06/01
Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front) - Install" {3256, 3258}
973D Track-Type Loader
Engine Starting with Jump Start Cables
973 K Track-Type Loaders
Control Valve (Multipurpose Bucket)
973 K Track-Type Loaders
Control Valve (Bucket Tilt)
C9.3 Engines for Caterpillar Built Machines
Water Temperature Regulator - Remove and Install
C4.2 and C6.4 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
2009/06/15
New Fasteners for the Valve Mechanism Cover {1107, 1120}
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pump - Disassemble
C7.1 Industrial Engine
Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C15 and C18 Tier 4 Final Engines
General Information
Rework Procedure To Update the Radiator Group{1353, 7251}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
2009/11/16
New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pump - Assemble
Installation and Initial Start-Up Procedure for Certain Engines {1000}
973 K Track-Type Loaders
Lift Cylinder
D6T Track-Type Tractor Hydraulic System
Lift Cylinder (Bulldozer)
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Power Train
Transmission Planetary