2009/06/08 An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310} Caterpillar


An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310}
`
2009/06/08 [SEPD0995]
HYDRAULIC SYSTEM
LINES GP-RIPPER
2009/06/08 An Improved Hydraulic Hose Assembly With Improved Routing Is Now Used For the Head End Of the Hydraulic cylinders On the Ripper {5057, 5352, 6310}
Track-Type Tractor:
D9R (S/N: JJB1-UP; ABK1-UP; ACL1-UP; 7TL1-UP; 8BL1-UP; WDM1-UP)
D9T (S/N: RJS1-UP)

Description of Change: An improved hydraulic hose assembly with improved routing is now used on the D9R and D9T. The new hydraulic hose and routing will improve the service life for the hydraulic hose.

Adaptable To: The improved hose assembly is effective with the following machines:

  • D9R (S/N: WDM1702-UP)

  • D9T (S/N: RJS1376-UP)

The improved hose assembly is adaptable to the following machines:

  • D9R (S/N: JJB1-UP; ABK1-UP; ACL1-UP; 7TL1-UP; 8BL1-UP; WDM1-1701)

  • D9T (S/N: RJS1-1375)

Table 1
Required Parts    
New Part Number     Description     Former Part Number     Quantity    
344-7014     Hose Assembly     135-6413     1    



Illustration 1g01940056

The former 135-6413 Hose Assembly




Illustration 2g01940086

The new 344-7014 Hose Assembly with improved routing

Information System:

D6T Track-Type Tractor Hydraulic System Piston Pump (Fan Drive)
973 K Track-Type Loaders Hydraulic Manifold (Bank Valve Outlet)
973 K Track-Type Loaders Control Valve (Ripper)
2009/06/01 Correction to Disassembly and Assembly , "Differential and Bevel Gear (Front) - Install" {3256, 3258}
973D Track-Type Loader Engine Starting with Jump Start Cables
973 K Track-Type Loaders Control Valve (Multipurpose Bucket)
973 K Track-Type Loaders Control Valve (Bucket Tilt)
C9.3 Engines for Caterpillar Built Machines Water Temperature Regulator - Remove and Install
C4.2 and C6.4 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
D5R Track-Type Tractor Connector Contact Description
2009/06/15 Improved Routing of the Harness Enhances Reliability {1408, 5063, 5705}
2009/06/01 The Assembly Process for the Front Axle Mount is Now Improved {3258, 3260}
2010/05/27 An Improved Oil Supply Line for the Turbocharger Is Used on Some Track-Type Tractors {1052, 1307}
2009/06/15 Selection of Wire Rope and Use for PACCAR Winches {5163}
2009/08/17 A New Baffle, A New Bracket, and New Seals Are Now Available On Certain Wheel Tractor-Scrapers {1353, 7251}
2009/06/15 New Fasteners for the Valve Mechanism Cover {1107, 1120}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Disassemble
C7.1 Industrial Engine Exhaust Combustion (ARD) - Aftertreatment Regeneration Device
C15 and C18 Tier 4 Final Engines General Information
Rework Procedure To Update the Radiator Group{1353, 7251}
Installation of the Payload Monitoring System in Certain Wheel Loaders {7494}
2009/11/16 New Window Washer Tank Group is Available for Certain Wheel Tractor-Scrapers {7306}
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Pump - Assemble
Installation and Initial Start-Up Procedure for Certain Engines {1000}