New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
`
2009/06/15
[SEPD0996]
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-ENGINE
2009/06/15
New Software Is Now Used For Elevated Idle {1901, 1902, 1920}
- Wheel Tractor-Scraper:
- 621G (S/N: DBB1-UP)
- 623G (S/N: DBC1-UP)
- 627G (S/N: DBD1-UP)
- 631G (S/N: DFA1-UP)
- 637G (S/N: DFJ1-UP)
- 657G (S/N: W1B1-UP)
- 657G (S/N: W1C1-UP)
Description of Change: New software is now used. The new software provides an elevated idle speed for wheeled tractor-scrapers with engines that are cold. Elevated engine idle in cold ambient conditions improves the operation of the engine.
Show/hide table
| Flash Files for Wheel Tractor-Scrapers | |
| Model | Software Part Number |
| 620 Front | 3286012.fls (1) |
| 630 Front | 3390927.fls |
| 637 Rear | 3390928.fls |
| 657 Front | 3272227.fls |
| 657 Rear | 3028858.fls |
Show/hide table
| ( 1 ) | The extension ".fls" does not need to be used when you perform the search on SIS Web. |
SIS Web Search for Software Down Load
Perform the following steps in order to find the software files that are needed.
- Open SIS Web. On the "Main Menu", click on "Service Software Files" (1). Refer to Illustration 1.
Show/hide table
 | |
| Illustration 1 | g01933396 |
- After the "Service Software Files" dialog opens, click on "Flash Files-ECM Software Files". Refer to Illustration 2.
Show/hide table
 | |
| Illustration 2 | g01933398 |
- After the "Flash Files-ECM Software Files" dialog opens, type the part number for the flash file in the "Flash File" field (3). Click "Search" (4). Refer to Illustration 3. The link (5) for the flash file will appear.
Show/hide table
 | |
| Illustration 3 | g01933400 |
- Click on the link (5) .
- A "File Download" dialog will appear with the options to "Open", "Save", or "Cancel".
- Click on "Save". Select the desired location for saving the file. The file can then be executed.
Adaptable To: The new software is adaptable to the serial numbers that are listed above. The new software is effective with the serial numbers that are listed in Table 2.
Show/hide table
| The New Software is Effective with the Following Serial Numbers: | |
|---|---|
| Model | Effective Serial Number |
| 621G | (S/N: DBB642-UP) |
| 623G | (S/N: DBC506-UP) |
| 627G | (S/N: DBD908-UP) |
| 631G | (S/N: DFA356-UP) |
| 637G | (S/N: DFJ351-UP) |
| 657G | (S/N: W1B135-UP) |
| 657G | (S/N: W1C281-UP) |
Information System:
CUSTOM SERVICE INFORMATION for the 980H UNDERGROUND MINE AR {1050, 1051, 4250, 4267, 4300, 4307, 4330, 5050, 5109, 5112, 5134, 7000}
C9.3 Engines for Caterpillar Built Machines
Fuel Manifold - Remove and Install - Return
3500B Engines
Air Shutoff
973D Track-Type Loader Hydraulic System
General Information
D7E Track-Type Tractor
Lifting and Tying Down the Machine
988G Wheel Loader Power Train
Torque Converter (Lockup) - Assemble - Type 2
D6T Track-Type Tractor Hydraulic System
Piston Pump (Steering)
C9.3 Engines for Caterpillar Built Machines
Relief Valve (Fuel) - Remove and Install
C9.3 Engines for Caterpillar Built Machines
Fuel Manifold (Rail) - Remove and Install
D6T Track-Type Tractor Hydraulic System
Piston Pump (Implement)
3500B Engines for Caterpillar Built Power Modules
Fuel Injector Mechanism
973D Track-Type Loader Machine Systems
Fuel Tank
973D Track-Type Loader
Monitoring System
C13 Engines for Caterpillar Built Machines
Fuel System - Prime
C13 Engines for Caterpillar Built Machines
Fuel System Pressure - Test
D7E Track-Type Tractor
Declaration of Conformity
2009/06/15
New Sensors Are Now Available For the Implement Control Lever On Certain Track-Type Tractors {5737}
2009/09/07
Protective Covers For the Joint On the Equalizer Bar Are Now Used {7206}
973D Track-Type Loader Hydraulic System
Tilt Circuit
2009/06/15
The Engine Enclosure May Need to Be Updated {7267, 7276}
973D Track-Type Loader Hydraulic System
Bucket Control
973D Track-Type Loader Hydraulic System
Multipurpose Bucket Circuit
973D Track-Type Loader Hydraulic System
Signal Resolver Network
973D Track-Type Loader Hydraulic System
Ripper Circuit