Correction to the Disassembly and Assembly , "Tailgate - Remove" {7250, 7271}
`
2009/05/25
[SEPD0993]
2009/05/25
Correction to the Service Manual , "Ejector Body" {7258}
2009/05/25
Correction to the Disassembly and Assembly , "Tailgate - Install" {7250, 7271}
FRAME AND BODY
BODY GP-TRUCK
2009/05/25
Correction to the Service Manual , "Ejector Body" {7258}
2009/05/25
Correction to the Disassembly and Assembly , "Tailgate - Remove" {7250, 7271}
2009/05/25
Correction to the Disassembly and Assembly , "Tailgate - Install" {7250, 7271}
- Underground Articulated Truck:
- AD30 (S/N: DXR357-UP)
The information in the above module has changed for AD30 DXR357-UP. Include the following information with the existing information. The existing information is correct for AD30 DXR1-356.
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 1U-9201     | Lever Puller Hoist     | 1     |
B     | 278-6932     | Body Lifting Gp (Tailgate)     |
1     |
Start By:
a. Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
b. Remove the tailgate cylinders. Refer to Disassembly and Assembly, "Tailgate Cylinder - Remove".
- Install Tooling (A), Tooling (B), a suitable spreader bar and a suitable lifting device to tailgate (1). The weight of tailgate (1) is approximately 405 kg (895 lb).
Show/hide table
![]() | |
Illustration 1 | g01181385 |
- Disconnect hose assembly (2) .
Show/hide table
![]() | |
Illustration 2 | g01882571 |
- Remove bolt (5), spacer (4) and pin (3) .
Show/hide table
![]() | |
Illustration 3 | g01883534 |
- Repeat Step 2 and Step 3 for the other side.
- Remove tailgate (1) .
Information System:
3516B Engine for 994F and 994H Wheel Loaders
Power Is Intermittently Low or Power Cutout Is Intermittent
AccuGrade</SUP> GPS / Single UTS / Site and Laser Reference v11 for Excavators
Excavator Arm Sensors - Calibrate - PSC System
2009/08/17
A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
C9.3 Engines for Caterpillar Built Machines
Fuel Lines - Remove and Install
Procedure For Replacing The Harness Between The Chassis And The Hitch{1408}
2009/05/25
Correction to the Service Manual , "Ejector Body" {7258}
D5R Track-Type Tractor
Steering Is Harsh
C11 and C13 Engines
Cylinder Head Valves
C9.3 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove and Install
2009/05/25
Correction to the Operation and Maintenance Manual , "Engine Air Filter Primary Element - Clean/Replace" {1054}
C13, C15, and C18 Tier 4 Interim Engines
Event Codes
C13, C15, and C18 Tier 4 Interim Engines
Diagnostic Trouble Codes
2009/05/25
Correction to the Disassembly and Assembly , "Tailgate - Install" {7250, 7271}
2009/06/29
Fuel Injection Pump Latch Valve for 3054C Engines {1251}
621G Wheel Tractor-Scraper
Declaration of Conformity
623G Wheel Tractor-Scraper
Declaration of Conformity
627G Wheel Tractor-Scraper
Declaration of Conformity
631G Wheel Tractor-Scraper
Declaration of Conformity
637G Wheel Tractor-Scraper
Declaration of Conformity
657G Wheel Tractor-Scraper
Declaration of Conformity
613G Wheel Tractor-Scraper
Declaration of Conformity
988G Wheel Loader Power Train
Torque Converter (Lockup) - Disassemble - Type 2
2009/06/22
Improvements Have Been Made to the Lift Cylinder {5102}
D6T Track-Type Tractor Systems
Hydraulic Tank and Filter