2009/05/25 Correction to the Service Manual , "Ejector Body" {7258} Caterpillar

Correction to the Service Manual , "Ejector Body" {7258}

2009/05/25 [SEPD0993]

2009/05/25 Correction to the Operation and Maintenance Manual , "Engine Air Filter Primary Element - Clean/Replace" {1054}

2009/05/25 Correction to the Disassembly and Assembly , "Tailgate - Remove" {7250, 7271}

FRAME AND BODY

BODY GP-TRUCK

2009/05/25 Correction to the Service Manual , "Ejector Body" {7258}

2009/05/25 Correction to the Disassembly and Assembly , "Tailgate - Remove" {7250, 7271}

2009/05/25 Correction to the Disassembly and Assembly , "Tailgate - Install" {7250, 7271}

Underground Articulated Truck:
AD30 (S/N: DXR357-UP)
Service Manual, RENR8595, "Machining and Welding Information for Underground Articulated Trucks", "Ejector Body". The Module is part of Service Manual, RENR8521 Volume II.

The information in the above module has changed for AD30 DXR357-UP. Replace the information with the following information.

Dimensions for Ejector Bodies

Show/hide table




Illustration 1	g01918333
The illustration is a graphic representation of the ejector body used on AD30 and AD45B machines. Some differences may exist.

AD45B Underground Articulated Truck

Show/hide table

Table 1
Body Machine Finished Dimensions
Location	Bore Location	Dimension	Material Specification
D1	Ejector Cylinder Mount	63.50 + 0.075 - 0.025 mm (2.500 + 0.0030 - 0.0010 inch)	MS106
S1	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS106
D2	Ejector Cylinder Mount	63.55 ± 0.025 mm (2.5020 ± 0.0010 inch)	MS106 MS109
S2	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS106 MS109
D3	Tailgate Cylinder Mount	31.76 ± 0.25 mm (1.25 ± 0.010 inch)	MS109
S3	Tailgate Cylinder Mount	46.5 ± 0.5 mm (1.83 ± 0.02 inch)	MS109
D4	Tailgate Mount	108.00 ± 0.025 mm (4.2520 ± 0.0010 inch)	MS106
S4	Tailgate Mount	110.0 mm (4.33 inch)	MS106
D5	Body Mount	75.180 ± 0.025 mm (2.960 ± 0.0010 inch)	MS109
S5	Body Mount	162.0 mm (6.38 inch)	MS109
D6	Tailgate Bore	114.22 ± 0.05 mm (4.496 ± 0.002 inch)	MS106 MS109

AD30 Underground Articulated Truck S/N:DXR1-356

Show/hide table

Table 2
Body Machine Finished Dimensions
Location	Bore Location	Dimension	Material Specification
D1	Ejector Cylinder Mount	63.52 + 0.60 - 0.00 mm (2.500 + 0.024 - 0.000 inch)	MS109
S1	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS109
D2	Ejector Cylinder Mount	63.55 ± 0.025 mm (2.502 ± 0.0010 inch)	Weldox 700 Hardox 450
S2	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS106 MS109
D3	Tailgate Cylinder Mount	31.75 + 0.075 - 0.000 mm (1.25 ± 0.0030 - 0.0000 inch)	MS109
S3	Tailgate Cylinder Mount	46.5 mm (1.83 inch)	MS109
D4	Tailgate Mount	108.0 ± 0.025 mm (4.252 ± 0.0010 inch)	MS106 MS109
S4	Tailgate Mount	110.0 mm (4.33 inch)	MS106 MS109
D5	Body Mount	75.180 ± 0.025 mm (2.960 ± 0.0010 inch)	MS106 MS109
S5	Body Mount	162.0 mm (6.38 inch)	MS106 MS109
D6	Tailgate Bore	114.22 ± 0.05 mm (4.497 ± 0.002 inch)	MS106 MS109

AD30 Underground Articulated Truck S/N:DXR357-UP

Show/hide table

Table 3
Body Machine Finished Dimensions
Location	Bore Location	Dimension	Material Specification
D1	Ejector Cylinder Mount	63.580 ± 0.025 mm (2.5031 ± 0.0010 inch)	MS109
S1	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS109
D2	Ejector Cylinder Mount	63.580 ± 0.025 mm (2.5031 ± 0.0010 inch)	Weldox 700 Hardox 450
S2	Ejector Cylinder Mount	62.0 mm (2.441 inch)	MS106 MS109
D3	Tailgate Cylinder Mount	31.8 ± 0.025 mm (1.2519 ± 0.001 inch)	MS109
S3	Tailgate Cylinder Mount	48.0 ± 1 mm (1.889 ± 0.0393 inch)	MS109
D4	Tailgate Mount	63.580 ± 0.025 mm (2.5031 ± 0.0010 inch)	MS106 MS109
S4	Tailgate Mount	108.0 ± 0.5 mm (4.251 ± 0.0196 inch)	MS106 MS109
D5	Body Mount	75.18 ± 0.025 mm (2.9598 ± 0.001 inch)	MS106 MS109
S5	Body Mount	162.0 mm (6.38 inch)	MS106 MS109
D6	Tailgate Bore	100.02 ± 0.025 mm (3.938 ± 0.001 inch)	MS106 MS109