2009/05/18 Turbocharger Compressor Wheel {1052, 1053} Caterpillar


Turbocharger Compressor Wheel {1052, 1053}
`
2009/05/18 [SEPD0992]
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
2009/05/18 Turbocharger Compressor Wheel {1052, 1053}
Load Haul Dump:
R1300GSeries II (S/N: RSL1501-1553,2246-2246)
Track-Type Tractor:
D6N XL (S/N: DJA231-541)
D6N LGP (S/N: DJY121-678)
D6N XL (S/N: JAH154-155)
D6K LGP (S/N: DHA207-462)
D6K (S/N: NCF1-1)
D6K XL (S/N: FBH329-634,636-639)
Asphalt Paver:
AP655D (S/N: GNN200-201; MAN200-200; MAT200-202; GNZ200-209)
Soil Compactor:
CP56 (S/N: C5P101-102)
CP64 (S/N: C6P100-101)
CS74 (S/N: C8F100-100; C8S101-102)
CS76 (S/N: CYX100-102)
Excavator:
M316D (S/N: W6A291-563,567-567)
M318D (S/N: W8P205-532)
M318D MH (S/N: W8R161-195)
M322D (S/N: W2S113-231)
M322D MH (S/N: W2T201-220)
Motor Grader:
120M (S/N: B9C130-131; B9N130-146)
12M (S/N: B9F12-13; B9R12-23)
Paving Compactor:
CS56 (S/N: C5S101-103; FCS100-101)
CS64 (S/N: C6S100-100)
Track-Type Loader:
953D (S/N: LBP155-356)
Wheel Loader:
924H (S/N: HXC200-213; JTM210-212)
924HZ (S/N: BEF201-343)
928HZ (S/N: CXK160-181)
930H (S/N: DHC180-195; FTD190-191)
Wheel Tractor-Scraper:
613G (S/N: DBE101-106)

Description of Change: There have a number of isolated instances of issues with the compressor wheel for the turbocharger. If there are issues with the compressor wheel, the turbocharger may seize. This may cause the machine to lose power and the machine may emit black smoke. These issues with the compressor wheel are shown in illustration 1 and illustration 2.




Illustration 1g01913953

Typical example




Illustration 2g01913955

Typical example

An improved turbocharger has been introduced. The new turbocharger has an improved casting of the compressor wheel.

Adaptable To: The 315-9810 Turbocharger part number has not changed.

For the correct procedure to remove the turbocharger, refer to Disassembly and Assembly, "Turbocharger - Remove". For the correct procedure to install the turbocharger, refer to Disassembly and Assembly, "Turbocharger - Install".

Information System:

2009/06/01 Correction to System Operation Testing and Adjusting , "Piston Pump (Hydraulic Fan) Pressure - Test and Adjust" {5070}
2009/06/01 Correction to System Operation Testing and Adjusting , "Piston Pump (Hydraulic Fan) Pressure - Test and Adjust" {5070}
2009/06/01 Correction to System Operation Testing and Adjusting , "Hydraulic Fan System" {1386, 1387, 5050}
Oil Buildup on Remanufactured Cylinder Packs{1225}
2011/06/08 Managing Transmission Events {7610}
C13, C15, and C18 Tier 4 Interim Engines Exhaust Has Black Smoke
C9.3 Engines for Caterpillar Built Machines Engine Vibration Is Excessive
C13, C15, and C18 Tier 4 Interim Engines Diesel Particulate Filter Temperature Is Low
C11, C13, C15, and C18 Industrial Engines Coolant Contains Fuel
2010/07/02 Introduction of One Piece Piston Cylinder Packs for 3500 High Displacement Engines {1214, 1239, 1331}
2009/05/11 New Software for the Engine Electronic Control Module (ECM) is Used {1901, 1902, 1920}
2009/05/18 Improved Hardware is Now Available For the Retaining Ring on the Auger Drive for Certain Wheel Tractor-Scrapers {5904}
C9.3 Engines for Caterpillar Built Machines Fuel Priming Pump - Remove and Install
C3.4B Industrial Engine Cold Weather Starting
C15 and C18 Tier 4 Final Engines Air Inlet and Exhaust System
C9.3 Engines for Caterpillar Built Machines Fuel Filter Is Restricted
C13, C15, and C18 Tier 4 Interim Engines Fuel Consumption Is Excessive
C13 Engines for Caterpillar Built Machines Air Cleaner - Remove and Install
C11, C13, C15, and C18 Industrial Engines General Information
C13, C15, and C18 Tier 4 Interim Engines System Overview
C9.3 Engines for Caterpillar Built Machines Crankcase Fumes Disposal Tube Has Oil Draining
C11, C13, C15, and C18 Industrial Engines Exhaust System Contains Oil
C13, C15, and C18 Tier 4 Interim Engines Exhaust Temperature Is High
C13 Engine for Caterpillar Built Machines Engine Control Module - Remove and Install