New Machine Software is Now Used {7620}
`
2009/05/11
[SEPD0991]
2009/05/11
Improved Wiring Harnesses Are Now Available {1408}
2009/05/11
New Software for the Engine Electronic Control Module (ECM) is Used {1901, 1902, 1920}
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINE
2009/04/20
New Software Is Now Available for Cold Starting {7610, 7620}
2009/05/11
New Machine Software is Now Used {7620}
- Track-Type Tractor:
- D3K LGP (S/N: JTD1-UP)
- D3K XL (S/N: FFF1-UP)
- D3K LGP (S/N: LLL1-UP)
- D4K XL (S/N: MMM1-UP)
- D4K LGP (S/N: RRR1-UP)
- D5K LGP (S/N: JLF1-UP)
- D5K XL (S/N: WWW1-UP)
- D5K LGP (S/N: YYY1-UP)
Description of Change: New machine software is now used for the above listed machines.
Adaptable To: The new 338-0841 Machine Software Gp is used to improve tracking in the very low speed range. Refer to Table 1 for the effective serial numbers and the adaptable serial numbers.
Show/hide table
Effectivity of the New 338-0841 Machine Software Gp     | ||
Model     | Effective Serial Numbers     | Adaptable Serial Numbers     |
D3K LGP     | S/N:JTD170-UP     | S/N:JTD1-169     |
D3K LGP     | S/N:LLL651-UP     | S/N:LLL1-650     |
D3K XL     | S/N:FFF539-UP     | S/N:FFF1-538     |
D4K LGP     | S/N:RRR358-UP     | S/N:RRR1-357     |
D4K XL     | S/N:MMM474-UP     | S/N:MMM1-473     |
D5K LGP     | S/N:JLF223-UP     | S/N:JLF1-222     |
D5K LGP     | S/N:YYY844-UP     | S/N:YYY1-843     |
D5K XL     | S/N:WWW853-UP     | S/N:WWW1-852     |
Information System:
AccuGrade</SUP> GPS / Single UTS / Site and Laser Reference v11 for Excavators
Check Sensor Message
C9.3 Tier 4 Final Engines
Diesel Particulate Filter Collects Excessive Soot
C7.1 Industrial Engine
Glossary of Electronic Control Terms
C7.1 Industrial Engine
Electronic Control System
C4.4 Industrial Engine
Cleanliness of Fuel System Components
C7.1 Industrial Engine
Lubrication System
C7.1 Industrial Engine
Air Inlet and Exhaust System
C7.1 Industrial Engine
Introduction
C7.1 Industrial Engine
Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines
Electric Starting System - Test
C7.1 Engines for Caterpillar Built Machines
Alternator - Test
C11, C13, C15, and C18 Industrial Engines
Component Location
980H Wheel Loader Power Train
Transmission Planetary - Assemble - Heavy Duty
C9 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove and Install
C9 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
966H Wheel Loader and 972H Wheel Loader Machine Systems
Hood Tilt Actuator
2009/05/18
New Software for the AccuGrade Laser CD610 Display Is Now Available {7220, 7620}
C13, C15, and C18 Tier 4 Final Engines
Fuel Injection Lines
3516B Engine for 994F and 994H Wheel Loaders
Exhaust Has Excessive White Smoke
D5R Track-Type Tractor
Steering Is Unstable
C9.3 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3516B Engine for 994F and 994H Wheel Loaders
Oil Consumption Is Excessive
3516B Engine for 994F and 994H Wheel Loaders
Oil Contains Coolant
D5R Track-Type Tractor
Steering Turn Radius Is Large