2009/05/11 Improved Wiring Harnesses Are Now Available {1408} Caterpillar


Improved Wiring Harnesses Are Now Available {1408}
`
Wheel Loader:
950H (S/N: J5J164-UP; N1A109-UP; M1G155-UP; K5K126-2816,35142-35142,82298-UP)
950GSeries II (S/N: BAA1-UP; AYB1-UP; AYD1-UP; AYL1-UP; AXR1-UP; AYS1-UP; AXX1-UP)
962GSeries II (S/N: BAB1-UP; BAC1-UP; BAD1-UP; AYE1-UP; AYG1-UP; AXS1-UP)
962H (S/N: N4A108-UP; M3G156-UP; J6J149-149,156-UP; K6K129-439)
966H (S/N: A6D135-UP; A6G122-UP; A6J155-1373,1375-1424,1426-1428,1430-1436,1438-1444,1446-1456,1458-1465,1467-1521,1523-1533,1535-1535,1539-1549,1551-1554,1559-1561,1564-UP)
972H (S/N: A7D131-UP; A7G1-UP,121-UP; A7J153-UP)

Description of Change: Improved wiring harnesses are now available for the tilt position sensors on the machines that are listed above.

The new wiring harnesses that are shown in Table 1 replace the former wiring harnesses. The new wiring harnesses are more flexible. The greater flexibility helps prevent kinking of the protective hose.

Table 1
New Harness     Replaces    
316-8510 Sensor Harness As     272-9822 Sensor Harness As    
316-8511 Sensor Harness As     275-0026 Sensor Harness As    

Adaptable To: Table 2 shows the effectivity for the improved wiring harnesses.

Table 2
Improved Wiring Harnesses    
Model     Adaptable     Effective    
950G Series II     (S/N: AXR1-386)     (S/N: AXR387-UP)    
(S/N: AXX1-2127) (S/N: AXX2128-UP)    
(S/N: AYB1-1140) (S/N: AYB1141-UP)    
(S/N: AYD1-242) (S/N: AYD243-UP)    
(S/N: AYL1-2714) (S/N: AYL2715-UP)    
(S/N: AYS1-774) (S/N: AYS775-UP)    
(S/N: BAA1-1182) (S/N: BAA1183-UP)    
950H     (S/N: J5J164-1084)     (S/N: J5J1085-UP)    
(S/N: K5K126-2816) (S/N: K5K82299-UP)    
(S/N: K5K35142-35142)
(S/N: K5K82298-82298)
(S/N: M1G155-1742) (S/N: M1G1743-UP)    
(S/N: N1A109-3148) (S/N: N1A3149-UP)    
962G Series II     (S/N: AXS1-383)     (S/N: AXS384-UP)    
(S/N: AYE1-725) (S/N: AYE726-UP)    
(S/N: AYG1-391) (S/N: AYG392-UP)    
(S/N: BAB1-856) (S/N: BAB857-UP)    
(S/N: BAC1-345) (S/N: BAC346-UP)    
(S/N: BAD1-504) (S/N: BAD505-UP)    
962H     (S/N: J6J149-149)     (S/N: J6J315-UP)    
(S/N: J6J156-314)
(S/N: K6K129-439) (S/N: K6K440-UP)    
(S/N: M3G156-541) (S/N: M3G542-UP)    
(S/N: N4A108-1008) (S/N: N4A1009-UP)    
966H     (S/N: A6D135-2408)     (S/N: A6D2409-UP)    
(S/N: A6G122-3863) (S/N: A6G122-3863)    
(S/N: A6J155-1373) (S/N: 16J1565-UP)    
(S/N: A6J1375-1424)
(S/N: A6J1426-1428)
(S/N: A6J1430-1436)
(S/N: A6J1438-1444)
(S/N: A6J1446-1456)
(S/N: A6J1458-1465)
(S/N: A6J1467-1521)
(S/N: A6J1523-1533)
(S/N: A6J1535-1535)
(S/N: A6J1539-1549)
(S/N: A6J1551-1554)
(S/N: A6J1559-1561)
(S/N: 16J1564-1564)
972H     (S/N: A7D131-848)     (S/N: A7D849-UP)    
(S/N: A7G121-1234) (S/N: A7G1235-UP)    
(S/N: A7J153-383) (S/N: A7J384-UP)    

Information System:

C15 and C18 Industrial Engines Air Inlet Elbow - Remove and Install
2009/06/01 A New Bracket Updates the Access Door Group {7251, 7273}
Relocation Of The Expansion Tanks For The Implement Hydraulic System{1354, 5057, 5505}
Field Installation of the Payload Monitor Gp Kits{7494}
C9.3 Engines for Caterpillar Built Machines Injector Trim File - Install
C13 Tier 4 Final Engines General Information - C13 Engines
C9.3 Engines for Caterpillar Built Machines ECM Software - Install
C27 and C32 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install - C32
C9.3 Engines for Caterpillar Built Machines Electrical Connectors - Inspect
D5R Track-Type Tractor Hydraulic System Steering - Calibrate
2009/05/04 A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
C13 Tier 4 Final Engines Lubrication System
C15 and C18 Engines for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Assemble
C13 Tier 4 Final Engines Electronic Control System Components
C13 Engines for Caterpillar Built Machines Combustion Head - Remove and Install - Clean Emissions Module
AccuGrade GPS / Single UTS / Site and Laser Reference v11 for Excavators Universal Total Station - MT900
D7E Track-Type Tractor Power Train Track Roller Frame - Remove and Install
Procedure to Align the Dial on the Fuel Sender{1273, 7481, 7857}
C13 Engines for Caterpillar Built Machines Air Control Valve - Remove and Install - ARD Combustion, Clean Emissions Module
C13 Engines for Caterpillar Built Machines Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C15 and C18 Industrial Engines Nozzle Heater Harness - Remove and Install
2009/06/29 New Hardware is Available for Certain Wheel Tractor-Scrapers Draft Frames {6204, 7000, 7960}
C13 Engines for Caterpillar Built Machines Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Push Arms and Blade - Remove