A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
`
2009/05/04
[SEPD0990]
2009/05/04
Diagnostic Codes May Be Generated During The Calibration Procedures on D3G, D4G and D5G {4300, 5479}
2009/05/04
Improved Installation Procedure for the Heater Cable {7304}
OPERATOR STATION
MONITOR GP
2009/05/04
A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
- Soil Compactor:
- CS74 (S/N: C8F1-UP; C8S1-UP)
- Excavator:
- 311D (S/N: CLA1-UP; DDW1-UP)
- Machine Control and Guidance Products:
- ACCUGRADE (S/N: LGC1-UP)
- Motor Grader:
- 120H (S/N: CAF1-UP)
- Paving Compactor:
- CS-563E (S/N: ASA1-UP; CNG1-UP)
- Track-Type Tractor:
- D10T (S/N: RJG1-UP)
- Wheel Tractor-Scraper:
- 613G (S/N: ESB1-UP)
- CS76 (S/N: JCS1-UP; CYX1-UP)
- 312D (S/N: JBC1-UP; KCD1-UP; HCW1-UP; HJX1-UP)
- 314D (S/N: BYJ1-UP; PDP1-UP; SBP1-UP)
- 315D (S/N: NCM1-UP; CJN1-UP)
- 319D (S/N: BZH1-UP; FMH1-UP; EAW1-UP; DAY1-UP)
- 320D (S/N: MDE1-UP; DHK1-UP; FXK1-UP; GKL1-UP; CXY1-UP; EBY1-UP; JGZ1-UP)
- 323D (S/N: SDC1-UP; CYD1-UP; PBM1-UP; DKW1-UP)
- 324D (S/N: LAB1-UP; EJC1-UP; T2D1-UP; JJG1-UP; JGK1-UP; SYM1-UP; DFP1-UP; JKR1-UP; JLS1-UP; CJX1-UP)
- 325D (S/N: GPB1-UP; PKE1-UP; KDG1-UP; C4H1-UP; C7K1-UP; RJK1-UP; C8L1-UP; MCL1-UP; PAL1-UP; C9M1-UP; AZP1-UP; A3R1-UP; GBR1-UP; LWR1-UP; SCR1-UP; T2S1-UP; CYW1-UP)
- 330D (S/N: NBD1-UP; GGE1-UP; B6H1-UP; THJ1-UP; C5K1-UP; E4K1-UP; H3K1-UP; L2K1-UP; PEL1-UP; JJM1-UP; LEM1-UP; ERN1-UP; JLP1-UP; MWP1-UP; HAS1-UP; RAS1-UP; EDX1-UP; MEY1-UP; T2Y1-UP)
- 345C (S/N: TBA1-UP; FPC1-UP; SPC1-UP; ESD1-UP; WDE1-UP; AYF1-UP; CWG1-UP; TDG1-UP; GPH1-UP; TAJ1-UP; A3L1-UP; GCL1-UP; BZN1-UP; DHP1-UP; M2R1-UP; D3S1-UP; ELS1-UP; LYS1-UP; PJW1-UP; CPX1-UP; BWY1-UP)
- 365C (S/N: ELC1-UP; GWC1-UP; MEM1-UP; FEN1-UP; PAR1-UP; MCS1-UP; MCY1-UP)
- 385C (S/N: EDA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
- 120M (S/N: B9C1-UP; B9N1-UP; B9W1-UP; D9W1-UP)
- 12H (S/N: CBK1-UP; AMZ1-UP)
- 12M (S/N: B9F1-UP; B9R1-UP)
- 135H (S/N: CBC1-UP)
- 140H (S/N: CCA1-UP; APM1-UP)
- 140M (S/N: B9D1-UP; D9G1-UP; B9M1-UP)
- 143H (S/N: APN1-UP)
- 14H (S/N: ASE1-UP)
- 14M (S/N: B9J1-UP)
- 160H (S/N: ASD1-UP; CCP1-UP)
- 160M (S/N: B9E1-UP; B9L1-UP; D9T1-UP)
- 163H (S/N: ARL1-UP)
- 16H (S/N: ATS1-UP)
- 16M (S/N: B9H1-UP)
- CS-573E (S/N: CEB1-UP; CNN1-UP)
- CS-583E (S/N: DAJ1-UP; CNX1-UP)
- CS-663E (S/N: ASB1-UP; DAG1-UP)
- CS-683E (S/N: DAD1-UP; ASG1-UP)
- CS56 (S/N: C5S1-UP; FCS1-UP)
- CS64 (S/N: C7F1-UP; C6S1-UP)
- D3G (S/N: CFC1-UP; CFF1-UP; JMH1-UP; ZDN1-UP; BYR1-UP; CXT1-UP)
- D3K (S/N: FFF1-UP; LLL1-UP)
- D4G (S/N: FDC1-UP; HYD1-UP; CFN1-UP; TLX1-UP)
- D4K (S/N: MMM1-UP; RRR1-UP)
- D5G (S/N: WGB1-UP; RSC1-UP; RKG1-UP; FDH1-UP; DKT1-UP; CLW1-UP; FDW1-UP)
- D5K (S/N: JLF1-UP; WWW1-UP; YYY1-UP)
- D5N (S/N: AKD1-UP; AGG1-UP; CFH1-UP; CKT1-UP)
- D6K (S/N: DHA1-UP; FBH1-UP)
- D6N (S/N: DJA1-UP; CBF1-UP; CCG1-UP; ALH1-UP; CBJ1-UP; CCK1-UP; CBL1-UP; AKM1-UP; ALR1-UP; CCS1-UP; ALY1-UP; DJY1-UP)
- D6RSeries II (S/N: BNC1-UP; CAD1-UP; ADE1-UP; DAE1-UP; BRJ1-UP; BNL1-UP; AFM1-UP; BPM1-UP; AEP1-UP; BLT1-UP; FDT1-UP; AAX1-UP; BMY1-UP; BPZ1-UP; BRZ1-UP)
- D6RSeries III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; RFC1-UP; TBC1-UP; HCD1-UP; HKE1-UP; WRG1-UP; MTJ1-UP; DMK1-UP; JEK1-UP; EXL1-UP; JDL1-UP; DLM1-UP; LFM1-UP; LGP1-UP; DPS1-UP; GMT1-UP; MRT1-UP; EXW1-UP)
- D6T (S/N: JHB1-UP; ZEB1-UP; SMC1-UP; JWD1-UP; LBD1-UP; LAE1-UP; DJG1-UP; WCG1-UP; WFH1-UP; LKJ1-UP; SNK1-UP; DHL1-UP; KJL1-UP; SKL1-UP; KLM1-UP; GCT1-UP; RLW1-UP; LAY1-UP; RAY1-UP; PEZ1-UP)
- D8T (S/N: J8B1-UP; KPZ1-UP)
- D9T (S/N: RJS1-UP)
ReferenceSpecial Instruction, REHS4868, "Magnets for the Door on the AccuGrade CD700 Display".
Occasionally, the compact flash card is not detected when the card is inserted into the display. This issue can be caused by the magnet becoming separated from the door on the card reader which causes the internal magnetic switch to not function correctly. If the magnet becomes separated from the door, the display will not recognize the compact flash card.
Install the 337-5123 Magnet Kit in order to address this issue. The kit contains the following:
- Ten Magnets
- Alcohol Wipes
- Adhesive
This kit will be used for displays that are under a warranty and displays that are out of a warranty.
Refer to the Special Instruction that is listed above for instructions on installing the kit.
Information System:
C13 Tier 4 Final Engines
Lubrication System
A New Flange Assembly For the Torque Converter On the D10T Is Now Used{3101}
C15 and C18 Industrial Engines
Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
Installation of VIMS Guardian on Underground Mining Machines{7601}
2009/04/27
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/07/27
A New Fuel Line Is Now Used on D9T Track-Type Tractors {1274}
Relocation of the Rear Disconnect Switch {1411}
3500B and 3500C Marine Engines
Alternator and Regulator
2009/04/27
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C11, C13, C15, and C18 Industrial Engines
ECM - Replace
D5R Track-Type Tractor
Hydraulic System Oil Contains Air
C9.3 Engine for Wheel Tractor-Scrapers
Electrical Connectors
D5R Track-Type Tractor Hydraulic System
Steering - Calibrate
C9.3 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C32
C9.3 Engines for Caterpillar Built Machines
ECM Software - Install
C13 Tier 4 Final Engines
General Information - C13 Engines
C9.3 Engines for Caterpillar Built Machines
Injector Trim File - Install
Field Installation of the Payload Monitor Gp Kits{7494}
Relocation Of The Expansion Tanks For The Implement Hydraulic System{1354, 5057, 5505}
2009/06/01
A New Bracket Updates the Access Door Group {7251, 7273}
C15 and C18 Industrial Engines
Air Inlet Elbow - Remove and Install
2009/05/11
Improved Wiring Harnesses Are Now Available {1408}
C15 and C18 Engines for Caterpillar Built Machines
Exhaust Gas Valve (NRS) - Assemble