A New Fuel Line Is Now Used on D9T Track-Type Tractors {1274}
`
2009/07/27
[SEPD1002]
2009/07/27
Improvements Have Been Made to the Automatic Lubrication System (Hydraulic Actuated Systems) {7540}
2009/07/27
A Orifice Plug on the Hystat Motor for the 906H Wheel Loader, 907H Wheel Loader, and 908H Wheel Loader May Need to be Torqued or Replaced {3016, 5057}
FUEL SYSTEM
LINES GP-FUEL
2009/07/27
A New Fuel Line Is Now Used on D9T Track-Type Tractors {1274}
- Track-Type Tractor:
- D9T (S/N: RJS1-UP)
Description of Change: The new fuel line is designed for extended service life.
Adaptable To: 313-9115 Tube As is a direct replacement for 279-6386 Hose As .
The new fuel line is adaptable back to the first production of the above listed machines. Refer to Table 1 for a list of required parts. The effective serial number in production is RJS01368.
Show/hide table
Required Parts     | |||
Item     | Qty     | Part Number     | Description     |
1     | 1     | 313-9115     | Tube As     |
2     | 2     | 325-6994     | Clip     |
3     | 2     | 325-6995     | Clip     |
4     | 2     | 3K-1787     | Grommet     |
5     | 2     | 0L-1351     | Bolt     |
6     | 3     | 9X-6458     | Hard Washer     |
7     | 2     | 6V-8636     | Connector     |
8     | 2     | 6V-8397     | O-Ring Seal     |
9     | 2     | 3J-1907     | O-Ring Seal     |
10     | 3     | 1C-2251     | Bolt     |
11     | 1     | 329-7531     | Bracket As     |
12     | 5     | 8T-1889     | Clip     |
13     | 5     | 8T-1890     | Clip     |
14     | 1     | 7V-6571     | Grommet     |
15     | 1     | 9G-8140     | Spacer     |
16     | 1     | 5M-2894     | Hard Washer     |
Show/hide table
![]() | |
Illustration 1 | g01890754 |
(1) 313-9115 Tube As (2) 325-6994 Clip (3) 325-6995 Clip (4) 3K-1787 Grommet (5) 0L-1351 Bolt (6) 9X-6458 Hard Washer (7) 6V-8636 Connector (8) 6V-8397 O-Ring Seal (9) 3J-1907 O-Ring Seal (10) 1C-2251 Bolt (11) 329-7531 Bracket As (12) 8T-1889 Clip (13) 8T-1890 Clip (14) 7V-6571 Grommet (15) 9G-8140 Spacer (16) 5M-2894 Hard Washer |
Information System:
Relocation of the Rear Disconnect Switch {1411}
3500B and 3500C Marine Engines
Alternator and Regulator
2009/04/27
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
C11, C13, C15, and C18 Industrial Engines
ECM - Replace
D5R Track-Type Tractor
Hydraulic System Oil Contains Air
C9.3 Engine for Wheel Tractor-Scrapers
Electrical Connectors
D5R Track-Type Tractor
Hydraulic System Has Unusual Noise
C15 and C18 Industrial Engines
Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
980H Wheel Loader Power Train
Transmission Planetary - Disassemble - Heavy Duty
D5R Track-Type Tractor
MID 039 - CID 2671 - FMI 06
D7E Track-Type Tractor Power Train
Track Adjuster - Assemble
D7E Track-Type Tractor Power Train
Track Adjuster - Disassemble
2009/04/27
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
Installation of VIMS Guardian on Underground Mining Machines{7601}
C15 and C18 Industrial Engines
Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
A New Flange Assembly For the Torque Converter On the D10T Is Now Used{3101}
C13 Tier 4 Final Engines
Lubrication System
2009/05/04
A Repair Kit for the Magnet is Now Available for the AccuGrade CD700 Display {7490}
D5R Track-Type Tractor Hydraulic System
Steering - Calibrate
C9.3 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C32
C9.3 Engines for Caterpillar Built Machines
ECM Software - Install
C13 Tier 4 Final Engines
General Information - C13 Engines
C9.3 Engines for Caterpillar Built Machines
Injector Trim File - Install