- Wheel Tractor-Scraper:
- 613 (S/N: 71M1-UP)
- 613B (S/N: 38W1-UP)
- 613CSeries II (S/N: KEH1-UP; 8LJ1-UP)
- 613C (S/N: 92X1-UP)
- 613G (S/N: DXA1-UP; ESB1-UP; DBE1-UP)
A new installation tool is available for the hitch pins on the Wheel Tractor-Scrapers that are listed above. The new tool will ease the installation of certain hitch pins. The new tool will need to be fabricated and the new tool will only work on hitch pins that have male threads on one end of the hitch pin.
The installation tool provides a tapered surface in order to ease the installation of the hitch pins. The tool will be removed after the installation of the hitch pin is complete.
This tool may only be used on the following hitch pins:
- 9J-1552 Pin
- 8J-5014 Pin
- 299-8020 Pin
Illustration 1 will provide information in order to fabricate the installation tool. The installation tool must be made from high strength alloy steel, ASTM A304 or ASTM A322.
 | |
| Illustration 1 | g01886771 |
(A) Angle of 15 degrees (B) 25 mm (1 inch) (C) 1.5 inch - 12-2A thread (D) 1.5 mm (0.06 inch) Chamfer at 45 degrees (E) 65 mm (2.56 inch) (F) 63.3 mm (2.5 inch) | |
Illustration 2 shows the installation tool on a hitch pin.
 | |
| Illustration 2 | g01886788 |
(1) Installation tool (2) Pin | |