3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Remove Caterpillar


Turbocharger - Remove
`
3044C Industrial Engine and Engines for Caterpillar Built Machines [RENR7582]
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Install
1.1. Removal Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
ZZ     9U-7089     Tapered Cap/Plug     1    
9U-7090 Tapered Cap/Plug     1    
9U-7070 Tapered Cap/Plug     1    
9U-7087 Tapered Cap/Plug     4    

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on AVSpare products.

Dispose of all fluids according to local regulations and mandates.





    Illustration 1g01035595

  1. Remove bolt (1). Remove bolts (2). Disconnect tube assembly (3) and remove gasket (4) .



    Illustration 2g01035597

  1. Remove bolts (9). Disconnect elbow assembly (10) and remove gasket (8). Remove nuts (6). Remove turbocharger (5) and gasket (7) .

Information System:

TH220B, TH330B and TH340B Telehandlers Machine Systems Carriage Cylinder (Sideshift)
854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Hydraulic Control Valve - Remove
966G II and 972G II Wheel Loaders Monitoring System
AD30 Underground Articulated Truck Machine Electrical System Brake Oil Temperature
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Hydraulic Control Valve - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install - Turbocharged Engines
980G Series II Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
854G Wheel Tractor and 992G Wheel Loader Power Train Axle Shaft - Remove and Install
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Diagnostic Code List
2003/06/02 New Guard Assembly for the Tilt Position Sensor Is Used {5736}
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel - Disassemble
988H Wheel Loader Operator Controls
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel - Assemble
988G Wheel Loader Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Operation Information
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
854G Wheel Tractor and 992G Wheel Loader Power Train Torque Converter - Disassemble
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Engine Starting
3054E Industrial Engine Electric Starting Motor - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
966G II and 972G II Wheel Loaders Work Tool Positioner