3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Install Caterpillar


Engine Oil Cooler - Install
`
3044C Industrial Engine and Engines for Caterpillar Built Machines [RENR7582]
COOLING SYSTEM
COOLER GP
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Install
1.1. Installation Procedure

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01035413



    Illustration 2g01035412

  1. Install gaskets (5) and O-ring seals (6). Position cover (4) on oil cooler assembly (7). Install nuts (3) .



    Illustration 3g01035409

  1. Position engine oil cooler (2) and install bolts (1) .

  1. Fill the cooling system with coolant. Fill the lubrication system with engine oil. Refer to Operation and Maintenance Manual, "Refill Capacities" for the cooling system and the lubrication system capacities.

End By: Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".

Information System:

854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Hydraulic Control Valve - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install - Turbocharged Engines
980G Series II Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
854G Wheel Tractor and 992G Wheel Loader Power Train Axle Shaft - Remove and Install
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Diagnostic Code List
2003/06/02 New Guard Assembly for the Tilt Position Sensor Is Used {5736}
613C Series II Wheel Tractor Power Train Torque Converter - Assemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
613C Series II Wheel Tractor Power Train Torque Converter - Disassemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Water Pump - Remove and Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
AD30 Underground Articulated Truck Machine Electrical System Brake Oil Temperature
966G II and 972G II Wheel Loaders Monitoring System
854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Hydraulic Control Valve - Remove
TH220B, TH330B and TH340B Telehandlers Machine Systems Carriage Cylinder (Sideshift)
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Remove
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel - Disassemble
988H Wheel Loader Operator Controls
3044C Industrial Engine and Engines for Caterpillar Built Machines Turbocharger - Install
854G Wheel Tractor and 992G Wheel Loader Power Train Final Drive and Wheel - Assemble
988G Wheel Loader Engine Oil Level - Check
938G Wheel Loader and IT38G Integrated Toolcarrier Operation Information
3044C Industrial Engine and Engines for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install