3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install Caterpillar


Engine Oil Relief Valve - Remove and Install
`
3044C Industrial Engine and Engines for Caterpillar Built Machines [RENR7582]
LUBRICATION SYSTEM
LINES GP-ENGINE OIL
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 1g01033271

  1. Remove engine oil filter (1) with Tooling (A) .



    Illustration 2g01033273

  1. Remove engine oil relief valve (2) .

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.





    Illustration 3g01033273

  1. Install engine oil relief valve (2) and tighten to a torque of 44 to 54 N·m (33 to 40 lb ft).



    Illustration 4g01033271

  1. Install engine oil filter (1) .

Information System:

613C Series II Wheel Tractor Power Train Torque Converter - Install
2003/05/19 Correction to Testing and Adjusting , "Ride Control Accumulator Recharging Procedure" {5077}
2003/05/12 Correction to Testing and Adjusting , "Transmission Pressures - Test and Adjust" {3081}
613C Series II Wheel Tractor Power Train Torque Converter - Remove
980G Series II Wheel Loader Power Train Transmission Pressures - Test and Adjust
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Filter Base - Remove and Install
613C Series II Wheel Tractor Power Train Transmission and Transfer Gears - Install
TH220B, TH330B and TH340B Telehandlers Transmission and Hydraulic System Oil Level - Check
953C Track-Type Loader Hydraulic System Bucket Control Group
3044C Industrial Engine and Engines for Caterpillar Built Machines Exhaust Manifold - Remove and Install
963C Track-Type Loader Maintenance Interval Schedule
613C Series II Wheel Tractor Power Train Transmission and Transfer Gears - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Water Pump - Remove and Install
613C Series II Wheel Tractor Power Train Torque Converter - Disassemble
3044C Industrial Engine and Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
613C Series II Wheel Tractor Power Train Torque Converter - Assemble
2003/06/02 New Guard Assembly for the Tilt Position Sensor Is Used {5736}
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Diagnostic Code List
854G Wheel Tractor and 992G Wheel Loader Power Train Axle Shaft - Remove and Install
980G Series II Wheel Loader Cooling System Coolant Sample (Level 1) - Obtain
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Lines - Remove and Install - Turbocharged Engines
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Remove
854G Wheel Tractor and 992G Wheel Loader Power Train Transmission Hydraulic Control Valve - Install
3044C Industrial Engine and Engines for Caterpillar Built Machines Engine Oil Cooler - Install