Axle Shaft - Remove
`
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
[SENR9168]
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Housing - Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Leading Arm - Remove
POWER TRAIN
AXLE GP
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Shaft - Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Housing - Remove
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Housing - Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Shaft - Remove
1.1. Removal Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-7407 | Eyebolt | 1 |
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in AVSpare machines. Dispose of all fluids according to local regulations and mandates. |
- Rotate axle housing (1) and position drain plug (2) at the bottom of the housing. Drain the oil from axle housing (1). Remove drain plug (2) from axle housing (1) .
Show/hide table
 | |
| Illustration 1 | g00460508 |
- Remove six bolts (3) and remove cover (4) and the O-ring seal.
Show/hide table
 | |
| Illustration 2 | g00460533 |
- Install Tool (A) into axle (6). Pull axle (6) out of axle housing (1) in order to attach a nylon lifting strap and a hoist.
Show/hide table
 | |
| Illustration 3 | g00998442 |
- Attach a nylon lifting strap and a hoist to axle (6). Remove axle (6) from axle housing (1). The axle weighs approximately 27 kg (60 lb).
Show/hide table
 | |
| Illustration 4 | g00460571 |
Information System:
953C Track-Type Loader Power Train
Electronic Control Module Manifold
2003/05/19
Correction to Testing and Adjusting , "Ride Control Accumulator - Test and Charge" {5077}
AD30 Underground Articulated Truck Machine Electrical System
Electrical Power Supply
AD30 Underground Articulated Truck Machine Electrical System
Battery Disconnect Switch
AD30 Underground Articulated Truck Machine Electrical System
Accessories
AD30 Underground Articulated Truck Machine Electrical System
Charging System
953C Track-Type Loader Power Train
Brake and Final Drive Group
953C Track-Type Loader Power Train
Hydrostatic Drive Pump
953C Track-Type Loader Power Train
Hydraulic Oil Filter
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train
Axle Housing - Install
990 Series II Wheel Loader Hydraulic System
Ride Control Accumulator - Test and Charge
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System
MID 079 - CID 0132 - FMI 08
953C Track-Type Loader Hydraulic System
Hydraulic Tank and Filter
Cat Monitoring System
Numeric Readout Mode
988G Wheel Loader
Cooling System Coolant Sample (Level 1) - Obtain
TH220B, TH330B and TH340B Telehandlers Hydraulic System
General Information Table
963C Track-Type Loader
Engine Starting
963C Track-Type Loader
Capacities (Refill)
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Transmission Planetary - Disassemble
963C Track-Type Loader
Coolant Sample (Level 1) - Obtain - Diesel Engine Antifreeze/Coolant (DEAC)
Cat Digital Voltage Regulator
General Information
953C Track-Type Loader Hydraulic System
Lift Cylinder
G3500B Engines
Cooling System
D6N Track-Type Tractor Power Train
Steering Clutch and Brake - Disassemble