615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Install Caterpillar


Axle Housing - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-7407     Eyebolt     1    

Note: Clean all parts and inspect all parts. If any parts are worn or damaged, use new AVSpare parts for replacement.




    Illustration 1g00460441

  1. Use two lift trucks and nylon lifting straps in order to position axle housing (11) up to the machine. Use a suitable lifting device to help support axle housing (11). The weight of the axle housing is approximately 1770 kg (3902 lb).



    Illustration 2g00460440

  1. Install pin (30). Position bar (29) and install two bolts (28) on both sides of the machine.



    Illustration 3g00460438

  1. Install washer (27) and three bolts (26) on both sides of the machine.



    Illustration 4g00998344

  1. Use Tool (A) and install pin (25) .



    Illustration 5g00460232

  1. Position head (23) and install three bolts (22). Position bar assembly (21) and install two bolts (20) .



    Illustration 6g00460183

  1. Align suspension rod (18) with suspension spring (19) and install pin (17). Install cotter pin (16) .



    Illustration 7g00460143

  1. Lift axle housing (11) and position arm assembly (15). Install pin (14) .



    Illustration 8g00460130

  1. Position washer (13) to axle housing (11) and install three bolts (12) .



    Illustration 9g00460082

  1. Position bar assembly (10) and two wire clips (9). Install two bolts (8). Connect hose assemblies (6) and (7) .



    Illustration 10g00460071

  1. Connect hose assemblies (1), (2), (3), (4) and (5) .

End By:

  1. Install the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Install". The information is in this manual.
  2. Install the tire and rim. Refer to Disassembly and Assembly, "Tire and Rim - Install". The information is in this manual.

Information System:

990 Series II Wheel Loader Hydraulic System Ride Control Accumulator - Test and Charge
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System MID 079 - CID 0132 - FMI 08
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Transmission and Torque Converter - Install
963C Track-Type Loader Monitoring System
963C Track-Type Loader Towing the Machine
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Operator Controls - Steering Control Console
2003/06/01 SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}
Installation Instructions for the 2Q-8245 Fan Control Ar (Auto Reversing) (Kit){1386, 138R}
2003/06/09 A New Fuse Panel Is Used {1417}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Location of Hydraulic Components
980G Series II Wheel Loader Monitoring System
953C Track-Type Loader Power Train Hydraulic Oil Filter
953C Track-Type Loader Power Train Hydrostatic Drive Pump
953C Track-Type Loader Power Train Brake and Final Drive Group
AD30 Underground Articulated Truck Machine Electrical System Charging System
AD30 Underground Articulated Truck Machine Electrical System Accessories
AD30 Underground Articulated Truck Machine Electrical System Battery Disconnect Switch
AD30 Underground Articulated Truck Machine Electrical System Electrical Power Supply
2003/05/19 Correction to Testing and Adjusting , "Ride Control Accumulator - Test and Charge" {5077}
953C Track-Type Loader Power Train Electronic Control Module Manifold
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Axle Shaft - Remove
953C Track-Type Loader Hydraulic System Hydraulic Tank and Filter
Cat Monitoring System Numeric Readout Mode