615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Remove Caterpillar


Axle Housing - Remove
`
1.1. Removal Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1P-7407     Eyebolt     1    

Start By:

  1. Remove the tire and rim. Refer to Disassembly and Assembly, "Tire and Rim - Remove ". The information is in this manual.
  2. Remove the axle shaft. Refer to Disassembly and Assembly, "Axle Shaft - Remove". The information is in this manual.


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "AVSpare Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in AVSpare machines.

Dispose of all fluids according to local regulations and mandates.


  1. Put identification marks on all lines, hoses, wires, and tubes for installation purposes. Plug all lines, hoses and tubes. This helps prevent fluid loss and contamination of the oil system.



    Illustration 1g00460071

  1. Disconnect hose assemblies (1), (2), (3), (4) and (5) .



    Illustration 2g00460082

  1. Disconnect hose assemblies (6) and (7). Remove two bolts (8), two wire clips (9) and bar assembly (10) .



    Illustration 3g00460128

  1. Use two lift trucks and two nylon lifting straps in order to support axle housing (11) .



    Illustration 4g00460130

  1. Remove three bolts (12) and washer (13) from axle housing (11) .



    Illustration 5g00460143

  1. Lift axle housing (11) and remove pin (14). Move arm assembly (15) away from axle housing (11) .



    Illustration 6g00460183

  1. Remove cotter pin (16) and remove pin (17) from suspension rod (18). Disconnect suspension rod (18) from suspension spring (19) .



    Illustration 7g00460229

  1. Use a suitable lifting device in order to support axle housing (11) during removal.



    Illustration 8g00460232

  1. Remove two bolts (20) and bar assembly (21). Remove three bolts (22) and remove head (23) .



    Illustration 9g00998344

  1. Install Tool (A) into pin (25) and remove pin (25) .



    Illustration 10g00460438

  1. Remove three bolts (26) and washer (27) from both sides of the machine.



    Illustration 11g00460440

  1. Remove two bolts (28), bar (29) and pin (30) from both sides of the machine.



    Illustration 12g00460441

  1. Carefully lower and remove axle housing (11) from the machine. The weight of the axle housing is approximately 1770 kg (3902 lb).

Information System:

IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Transmission and Torque Converter - Install
963C Track-Type Loader Monitoring System
963C Track-Type Loader Towing the Machine
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Operator Controls - Steering Control Console
2003/06/01 SOLAS Requirement for Screening Fuel and Oil Line Connections on Marine Engines {1274, 1307}
Installation Instructions for the 2Q-8245 Fan Control Ar (Auto Reversing) (Kit){1386, 138R}
2003/06/09 A New Fuse Panel Is Used {1417}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Location of Hydraulic Components
980G Series II Wheel Loader Monitoring System
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Transmission and Torque Converter - Remove
IT28G Integrated Toolcarrier and 924G, 924Gz and 928G Wheel Loaders Window Wiper and Wiper Motor
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Operator Controls - Left Side Console for IT62G and 962G Parallel Lift Machines
953C, 963C and 973C Track-Type Loaders Transmission Electronic Control System MID 079 - CID 0132 - FMI 08
990 Series II Wheel Loader Hydraulic System Ride Control Accumulator - Test and Charge
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Axle Housing - Install
953C Track-Type Loader Power Train Hydraulic Oil Filter
953C Track-Type Loader Power Train Hydrostatic Drive Pump
953C Track-Type Loader Power Train Brake and Final Drive Group
AD30 Underground Articulated Truck Machine Electrical System Charging System
AD30 Underground Articulated Truck Machine Electrical System Accessories
AD30 Underground Articulated Truck Machine Electrical System Battery Disconnect Switch
AD30 Underground Articulated Truck Machine Electrical System Electrical Power Supply
2003/05/19 Correction to Testing and Adjusting , "Ride Control Accumulator - Test and Charge" {5077}
953C Track-Type Loader Power Train Electronic Control Module Manifold