924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Install Caterpillar


Gear Motor (Hydraulic Fan) - Install
`
1.1. Installation Procedure

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00993229

  1. Position fan motor (11) and install bolts (10).


    Illustration 2g00993390

  2. Position fan (9) and install nut (8).


    Illustration 3g00993223

  3. Position fan guard (7) and install bolts (6).


    Illustration 4g00993222

  4. Close fan housing (5).


    Illustration 5g00993220

  5. Connect harness assemblies (4).


    Illustration 6g00993218

  6. Connect hose assemblies (3).


    Illustration 7g00993216

  7. Position guard (2) and install bolts (1).

  8. Fill the hydraulic oil system. Refer to Operation and Maintenance Manual, "Lubrication Viscocities and Refill Capacities".

Information System:

AD30 Underground Articulated Truck Parking Brake Manual Release
AD30 Underground Articulated Truck Braking System Parking Brake (Automatic Function)
AD30 Underground Articulated Truck Circuit Breakers - Reset
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Remove
Supplement for the 973C Track-Type Loader With the Steel Mill Arrangement{7000}
Installation of High Intensity Discharge Lights{1434}
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
990 Series II Wheel Loader Machine Systems Bucket - Remove
AD30 Underground Articulated Truck Reference Material
AD30 Underground Articulated Truck Hydraulic Tank Screen - Clean
963C Track-Type Loader Fire Prevention and Explosion Prevention
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Engine - Remove
3044C Industrial Engine and Engines for Caterpillar Built Machines Fuel Injection Nozzles
990 Series II Wheel Loader Machine Systems Bucket - Install
2003/06/09 New Software Released for Machine Security System (MSS) {7620}
2003/04/21 A Check Valve Is Used to Eliminate the Loss of Oil When the Hydraulic Filter Is Replaced {5051, 5067}
963C Track-Type Loader Power Train Calibration Procedures
TH62, TH63, TH82 and TH83 Telehandlers Specifications
C4.4 Industrial Engine Engine Oil Level - Check
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Engine - Install
3054E Industrial Engine Fuel Injection Pump - Remove
AD45 and AE40 II Underground Articulated Trucks Maintenance Interval Schedule