IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install Caterpillar


Hydraulic and Transmission Oil Cooler - Install
`
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement [RENR6437]
HYDRAULIC SYSTEM
COOLER GP
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install
1.1. Installation Procedure

Installation Procedure


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g00992924

  1. Use two people and position hydraulic oil cooler (8) on the machine. Install nuts (9).


    Illustration 2g00992923

  2. Install nuts (7) on hydraulic oil cooler (8).


    Illustration 3g00992918

  3. Connect hose assemblies (6).


    Illustration 4g00992917

  4. Connect hose assemblies (5).


    Illustration 5g00992916

  5. Position plate (4) and install bolts (3).


    Illustration 6g00992914

  6. Position plate (2) and install bolts (1).

  7. Close both side doors.

Information System:

D6N Track-Type Tractor Power Train Brake Control Valve - Assemble
D6N Track-Type Tractor Power Train Brake Control Valve - Disassemble
973K Track-Type Loader Final Drive Oil - Change
2003/04/14 Larger Fasteners Are Now Used on the Engine Bracket for the Governor Cable {1265, 1276}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
525B and 535B Wheel Skidders Lifting and Tying Down the Machine
953C Track-Type Loader Engine Oil and Filter - Change
2003/04/14 There is New Information on the Oil Grade Plug {1000, 1348}
953C Track-Type Loader Engine Oil Level - Check
Bench Test Procedure for a 928G Wheel Loader andIT28G Integrated Toolcarrier Transmission with a Flexible Coupling Drive{3030, 3066, 3073}
525D, 535D, 545D, 555D Wheel Skidder Grapple Snubber - Inspect/Adjust
525B and 535B Wheel Skidders Additional Messages
AD30 Underground Articulated Truck Hydraulic Tank Screen - Clean
AD30 Underground Articulated Truck Reference Material
990 Series II Wheel Loader Machine Systems Bucket - Remove
Bench Test Procedure for a 950H, 962H, 966G, 966G Series 2, 966H, 972G, 972G Series 2, and 972H Wheel Loader Transmission and a R1600H Load Haul Dump {3030, 3066, 3073, 3101}
TH350B, TH355B, TH360B and TH460B Telehandlers Circuit Breakers - Test
C-12 Marine Engines Fuel Temperature Sensor - Remove and Install
Installation of High Intensity Discharge Lights{1434}
Supplement for the 973C Track-Type Loader With the Steel Mill Arrangement{7000}
924G and 924GZ Wheel Loaders Machine Systems Gear Motor (Hydraulic Fan) - Remove
AD30 Underground Articulated Truck Circuit Breakers - Reset
AD30 Underground Articulated Truck Braking System Parking Brake (Automatic Function)
AD30 Underground Articulated Truck Parking Brake Manual Release