3054E Industrial Engine Boost Pressure Sensor - Remove and Install Caterpillar


Boost Pressure Sensor - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g00990351

  1. Disconnect the harness assembly from the boost pressure sensor. Remove the boost pressure sensor (1) from the cylinder head (2).

  2. Remove the O-ring seal from the boost pressure sensor. Discard the O-ring seal.

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 2g00990351

  1. Install a new O-ring seal on the boost pressure sensor (1). Lubricate the O-ring seal with clean engine oil.

  2. Install the boost pressure sensor (1) in the cylinder head (2). Tighten the boost pressure sensor to a torque of 10 N·m (89 lb in).

  3. Connect the harness assembly to the boost pressure sensor (1).

Information System:

C18 Industrial Engines Starting the Engine
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Implement System - Pilot Hydraulics
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Implement System - Electrohydraulic System
AD30 Underground Articulated Truck Transmission Oil Filter - Replace
AD30 Underground Articulated Truck Transmission Oil - Change
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Pilot Operated Hydraulic Control
2003/11/17 Changes to the Mounting Hardware Improve the Service Life of the Rear Frame {7051}
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Electrohydraulic Control
Installation of Product Link{7602}
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Relief Valve
C7 Engines for Caterpillar Built Machines Camshaft Bearings - Remove and Install
Installation Instructions for the 2Q-8564 Ride Control Gp (KIT){5004, 5004}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Hydraulic System Oil Sample - Obtain
966H Wheel Loader and 972H Wheel Loader Braking and Hydraulic Fan System Service Brakes
966G Series II Wheel Loader and 972G Series II Wheel Loader Steering System Metering Pump (HMU)
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Additional Messages
953C Track-Type Loader Hydraulic System Oil - Change
2003/04/14 Special Instruction, REHS1640, "Additional Documentation for the Payload Control System" Is Available {0374, 7494}
2003/04/07 Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
3054E Industrial Engine Inlet Air Temperature Sensor - Remove and Install
AD30 Underground Articulated Truck Transmission Oil Level - Check
AD30 Underground Articulated Truck Engine Oil Level - Check
3054E Industrial Engine Speed/Timing Sensor - Remove and Install
966G Series II Wheel Loader and 972G Series II Wheel Loader Hydraulic System Pilot Valve (Oil Manifold) - Electrohydraulic Machines