938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Disassemble Caterpillar

Disassembly Procedure

Start By:

1. Remove the proportional brake valve. Refer to Disassembly and Assembly, "Brake Valve (Proportional) (Traction Control System) - Remove".

Show/hide table

Illustration 1	g00282838

Show/hide table

Illustration 2	g00282839

1. Remove the following items from manifold (1): nuts (2), spacers (3) and coil assemblies (4).
   Show/hide table

   Illustration 3	g00282840

2. Remove cartridge assemblies (5) from manifold (1).
   Show/hide table

   Illustration 4	g00282842

3. Remove O-ring seals (6) from cartridge assemblies (5).
   Show/hide table

   Illustration 5	g00282843

4. Remove valves (7) from manifold (1).
   Show/hide table

   Illustration 6	g00282845

5. Remove O-ring seals (8) and the rings from valves (7).
   Show/hide table

   Illustration 7	g00282846

6. Remove nut (10) and coil assembly (9) from manifold (1).
   Show/hide table

   Illustration 8	g00282848

7. Remove cartridge assembly (11) from manifold (1).
   Show/hide table

   Illustration 9	g00282850

8. Remove O-ring seals (12) and the rings from cartridge assembly (11).
   Show/hide table

   Illustration 10	g00282851

9. Remove plugs (13), plug (14), and fitting (15) from manifold (1).