Final Drive - Remove
`
D6N Track-Type Tractor Power Train
[RENR5257]
D6N Track-Type Tractor Power Train
Track - Connect - Conventional
D6N Track-Type Tractor Power Train
Final Drive - Install
POWER TRAIN
DRIVE GP-FINAL
D6N Track-Type Tractor Power Train
Final Drive Planetary Carrier (In Chassis) - Remove
D6N Track-Type Tractor Power Train
Final Drive Planetary Carrier (In Chassis) - Install
D5N Track-Type Tractor Power Train
Final Drive - Disassemble
D5N Track-Type Tractor Power Train
Final Drive - Assemble
D6N Track-Type Tractor Power Train
Final Drive - Remove
D6N Track-Type Tractor Power Train
Final Drive - Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Differential, and Brake (Left Side) - Remove
1.1. Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 8T-3207 | Lifting Bracket | 1 |
| 5P-8622 | Shackle | 1 | |
| 9S-9076 | Spacer | 1 | |
| 7X-2557 | Bolt | 2 | |
Start By:
- Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
- Remove the axle. Refer to Disassembly and Assembly, "Axle - Remove".
- Adjust bracket (1) until Dimension (X) is equal to
80 mm (3.0 inch) .Show/hide table
Illustration 2 g00986692 - Remove bolts (2).
Show/hide table
Illustration 3 g00986693 - Attach Tooling (A) and a suitable lifting device to final drive (3).
Show/hide table
Illustration 4 g00986856 - Remove bolts (4) and bolts (5).
- Remove final drive (3). The weight of final drive (3) is approximately
408 kg (900 lb) .
Show/hide table
| |
| Illustration 1 | g00956633 |
Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator and Fan Group - Remove
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
539 Knuckleboom Loader
Operation
C4.4 (Mech) Industrial Engine
Valve Guide - Inspect
963C Track-Type Loader Machine Systems
Track
TH210 and TH215 Telehandlers
Access Doors and Covers
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Tilt Cylinder - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Remove
D6N Track-Type Tractor Power Train
Final Drive - Install
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Rated Load
3508B Engine
Radiator and Cooling System - Test
953C Track-Type Loader
Safety Messages
2004/08/23
New Exhaust Tubes and Heat Shields are Now Used {1050, 1061, 1067}
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders
Engine Starting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator and Fan Group - Install
525B Wheel Skidder, 535B Wheel Skidder and 545 Wheel Skidder Grapple
Hydraulic Rotator - Continuous Rotation Grapple
963C Track-Type Loader
Circuit Breakers and Fuses - Reset/Replace
3046 Engine for Caterpillar Built Machines
Engine Oil Pressure - Test
963C Track-Type Loader
Belt - Inspect/Replace
938G II Wheel Loader and IT38G II Integrated Toolcarrier
Engine Oil Sample - Obtain