IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Fuel Tank - Install Caterpillar

Installation Procedure

1. Use two people and install fuel tank (6) into the machine.
   Show/hide table

   Illustration 1	g00986702

2. Position battery cable assemblies (14) and connect battery cable assemblies (14).
   Show/hide table

   Illustration 2	g00986701

3. Position cover (13) and install bolts (12).

4. Repeat Steps 2 and 3 for the other side.
   Show/hide table

   Illustration 3	g00986700

5. Install the clamp and bolt (11).
   Show/hide table

   Illustration 4	g00986699

6. Position tube assemblies (10) and install bolt (9).
   Show/hide table

   Illustration 5	g00986697

7. Connect hoses (7) and tighten hose clamps (8).
   Show/hide table

   Illustration 6	g00986689

8. Slide hold down straps (4) onto fuel tank (6). Install bolts (5).
   Show/hide table

   Illustration 7	g00986687

9. Position compartment (2) and install bolts (3).
   Show/hide table

   Illustration 8	g00986684

10. Close cover (1) on compartment (2).

11. Fill the fuel tank with fuel. Refer to Operation and Maintenance Manual, "Capacities (Refill)".

End By:

1. Install the radiator and fan group. Refer to Disassembly and Assembly, "Radiator and Fan Group - Install".