EPC Parts Catalogs

D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Remove Caterpillar


  1. Home
  2. Disassembly and Assembly
  3. #92874
Final Drive, Steering Clutch and Brake - Remove
`
D6N Track-Type Tractor Power Train [RENR5267]
D6N Track-Type Tractor Power Train Steering Clutch and Brake Control Valve - Assemble
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Install
STEERING AND BRAKING SYSTEM
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Remove
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Install
D6N Track-Type Tractor Power Train Steering Clutch and Brake - Disassemble
D6N Track-Type Tractor Power Train Steering Clutch and Brake - Assemble
1.1. Removal Procedure

Removal Procedure

Show/hide table
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-3207     Lifting Bracket     1    
5P-8622 Shackle     1    
9S-9076 Spacer     1    
7X-2557 Bolt     2    

Start By:

  1. Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
  2. Remove the axle. Refer to Disassembly and Assembly, "Axle - Remove".
    Show/hide table

    Illustration 1g00956633

  1. Adjust bracket (1) until Dimension (X) is equal to 55 mm (2.0 inch).
    Show/hide table

    Illustration 2g00986692

  1. Remove bolts (2) .
    Show/hide table

    Illustration 3g00986693

  1. Attach Tooling (A) and a suitable lifting device to final drive (3) .
    Show/hide table

    Illustration 4g00987154

  1. Remove bolts (4) .

    Note: Do not remove bolts (4A) .

    Show/hide table

    Illustration 5g00986695

  1. Remove bolts (5) .
    Show/hide table

    Illustration 6g00986696

  1. Remove final drive (3). The weight of final drive (3) is approximately 590 kg (1300 lb).
    Show/hide table

    Illustration 7g00986745

  1. Remove O-ring seals (7) .

Information System:

938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Tilt Cylinder - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Fuel Tank - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Aftercooler - Install
D6N Track-Type Tractor Power Train Track - Connect - Conventional
D6N Track-Type Tractor Power Train Track - Separate - Conventional
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Aftercooler - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System Hydraulic System Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator - Install
D6N Track-Type Tractor Machine Systems Bulldozer C-Frame - Install
D6N Track-Type Tractor Machine Systems Bulldozer C-Frame - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System Operational Checks
D6N Track-Type Tractor Power Train Final Drive, Steering Clutch and Brake - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Fuel Tank - Install
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Install
TH210 and TH215 Telehandlers Access Doors and Covers
963C Track-Type Loader Machine Systems Track
C4.4 (Mech) Industrial Engine Valve Guide - Inspect
539 Knuckleboom Loader Operation
3034 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Radiator and Fan Group - Remove
D6N Track-Type Tractor Power Train Final Drive - Remove
D6N Track-Type Tractor Power Train Final Drive - Install
IT62G Integrated Toolcarrier and 950G and 962G Wheel Loaders Rated Load