Aftercooler - Install
`
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
[RENR6437]
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Remove
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Install
1.1. Installation Procedure
- Use two people and install aftercooler (8) into the machine. The weight of aftercooler (8) is approximately
23 kg (50 lb) . Install bolts and nuts (12).Show/hide table
Illustration 2 g00986638 - Install bolts and nuts (11).
Show/hide table
Illustration 3 g00986637 - Connect hose (10) and tighten hose clamp (9).
Show/hide table
Illustration 4 g00986627 - Install hose (7) onto aftercooler (8) and tighten hose clamps (6).
Show/hide table
Illustration 5 g00986626 - Position plate (5) and install bolts (4).
Show/hide table
Illustration 6 g00986624 - Position plate (3) and install bolts (2).
Show/hide table
Illustration 7 g00986622 - Close the left side door (1).
Show/hide table
| |
| Illustration 1 | g00986642 |
Information System:
D6N Track-Type Tractor Power Train
Track - Connect - Conventional
D6N Track-Type Tractor Power Train
Track - Separate - Conventional
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Hydraulic System Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Install
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Install
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Operational Checks
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Accumulator Charging Valve (Brake) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Accumulator - Remove and Install
2003/03/31
Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Tilt Cylinder - Remove and Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Remove
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Install
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install
TH210 and TH215 Telehandlers
Access Doors and Covers
963C Track-Type Loader Machine Systems
Track
C4.4 (Mech) Industrial Engine
Valve Guide - Inspect
539 Knuckleboom Loader
Operation
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator and Fan Group - Remove