Radiator - Install
`
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
[RENR6437]
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
COOLING SYSTEM
RADIATOR GP
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator and Fan Group - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator and Fan Group - Install
924G and 924GZ Wheel Loaders Machine Systems
Gear Motor (Hydraulic Fan) - Remove
924G and 924GZ Wheel Loaders Machine Systems
Gear Motor (Hydraulic Fan) - Install
1.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 138-7575 | Link Bracket | 2 |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Position side brackets (10) and install bolts (9). Install bracket (11) and install Tooling (A).
Show/hide table
Illustration 2 g00986558 - Attach a suitable lifting device onto Tooling (A) and install radiator assembly (8) into the machine. The weight of radiator assembly (8) is approximately
41 kg (90 lb) . Install bolts (7).Show/hide table
Illustration 3 g00986557 - Connect hoses (6) and tighten hose clamps (5).
Show/hide table
Illustration 4 g00986556 - Connect hoses (4) and tighten hose clamps (3).
Show/hide table
Illustration 5 g00986555 - Position cover (2) and install bolts (1).
- Fill the cooling system. The capacity of the cooling system is approximately
42 L (11.1 US gal) . Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
| |
| Illustration 1 | g00986562 |
End By:
- Install the hood. Refer to Disassembly and Assembly, "Hood - Install".
Information System:
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Install
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Operational Checks
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Accumulator Charging Valve (Brake) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Accumulator - Remove and Install
2003/03/31
Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
953C Track-Type Loader
Safety Messages - Arrangement 1
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Steering Cylinder - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Install
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Remove
2003/06/16
A New Accumulator Is Now Used {1805, 1808, 7320}
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Hydraulic System Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
D6N Track-Type Tractor Power Train
Track - Separate - Conventional
D6N Track-Type Tractor Power Train
Track - Connect - Conventional
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Tilt Cylinder - Remove and Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Remove
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Install
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install
TH210 and TH215 Telehandlers
Access Doors and Covers