Bulldozer C-Frame - Install
`
D6N Track-Type Tractor Machine Systems
[RENR5274]
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer Control Valve - Disassemble
IMPLEMENTS
C-FRAME GP
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Install
1.1. Installation Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1U-9202 | Lever Puller Hoist | 2 |
| B | 1U-9202 | Lever Puller Hoist | 1 |
| 138-7576 | Link Bracket | 2 | |
| C | FT-2802 | Puller Plate | 1 |
| 9U-5343 | Puller Stud | 1 | |
| 9U-5345 | Nut | 1 | |
| 6V-8237 | Washer | 1 | |
| 6V-2097 | Sleeve | 1 | |
| 6V-3160 | Double Acting Cylinder | 1 | |
| 3S-6224 | Electric Hydraulic Pump Gp | 1 | |
- Use Tooling (C) (not shown) to install bearing (11).
Show/hide table
Illustration 2 g01060449 - Attach Tooling (B) and a suitable lifting device to C-frame (5). Attach a suitable lifting device to pin (3) on both sides of the machine. Use Tooling (B) and a suitable lifting device to position C-frame (5) on the machine. The weight of C-frame (5) is approximately
998 kg (2200 lb) .Show/hide table
Illustration 3 g01223740 - Install shims (10) and pin (9) to C-frame (5). Install dowel (8) to C-frame (5).
Show/hide table
Illustration 4 g00986582 - Install pipe plug (7).
Show/hide table
Illustration 5 g00986583 - Connect hose assemblies (6).
- Repeat Steps 3 through 5 for the opposite side of the machine.
Show/hide table
Illustration 6 g01060404 - Remove the lifting device from pin (3). Remove retaining bolt (2) and pin (3).
- Extend bulldozer lift cylinder (4).
- Repeat Steps 7 and 8 for the opposite side of the machine.
Show/hide table
Illustration 7 g00986584 - Install Tooling (A) and a suitable lifting device onto the bulldozer lift cylinder.
Show/hide table
Illustration 8 g00986580 - Install shims (1) and pin (3). Install retaining bolt (2).
- Repeat Steps 10 and 11 for the opposite side of the machine.
- Remove Tooling (B).
Show/hide table
| |
| Illustration 1 | g00986581 |
End By:
- Install the bulldozer blade. Refer to Disassembly and Assembly, "Bulldozer (VPAT) - Install".
Information System:
D6N Track-Type Tractor Machine Systems
Bulldozer C-Frame - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Remove
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Operational Checks
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Accumulator Charging Valve (Brake) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Brake Accumulator - Remove and Install
2003/03/31
Correction to Testing and Adjusting , "Pilot System Pressure - Test and Adjust" {5050, 5050}
953C Track-Type Loader
Safety Messages - Arrangement 1
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Steering Cylinder - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Install
D6N Track-Type Tractor Machine Systems
Bulldozer (VPAT) - Remove
2003/06/16
A New Accumulator Is Now Used {1805, 1808, 7320}
3044C Industrial Engine and Engines for Caterpillar Built Machines
Piston and Rings
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Radiator - Install
651E and 657E Wheel Tractor-Scrapers Hydraulic System
Hydraulic System Troubleshooting
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Remove
D6N Track-Type Tractor Power Train
Track - Separate - Conventional
D6N Track-Type Tractor Power Train
Track - Connect - Conventional
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Aftercooler - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Tilt Cylinder - Remove and Install
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Remove
D6N Track-Type Tractor Power Train
Final Drive, Steering Clutch and Brake - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Tank - Install
3034 Engine for Caterpillar Built Machines
Crankshaft Main Bearings - Install