IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Crankshaft Front Seal - Install Caterpillar


Crankshaft Front Seal - Install
`
1.1. Installation Procedure

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
9U-6210  Front Seal Installer 


    Illustration 1g00985980

  1. Use Tooling (A) and install crankshaft front seal (8).


    Illustration 2g00985807

  2. Position pulley (7) and install bolts (6).


    Illustration 3g00985806

  3. Position vibration damper (5) and install bolts (4).


    Illustration 4g00985804

  4. Install V-belts (3). Refer to Operation and Maintenance Manual, "V-Belts - Inspect/Adjust/Replace".


    Illustration 5g00985939

  5. Install panel (2).


    Illustration 6g00985801

  6. Install panel (1).

Information System:

2003/03/24 Special Instruction, REHS1578, "Installation Instructions for the 9W-1494 Service Meter Kit " Is Available {7478}
938G Wheel Loader and IT38G Integrated Toolcarrier Safety Messages
D6N Track-Type Tractor Machine Systems Bottom Guard - Install
D6N Track-Type Tractor Machine Systems Bottom Guard - Remove
Replacement of Implement Pump with Gear Pump{5055, 5084}
980G Wheel Loader Power Train Torque Converter - Disassemble - Heavy Duty
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft
3046 Engine for Caterpillar Built Machines Connecting Rod - Inspect
D6N Track-Type Tractor Machine Systems Battery - Remove and Install
C-9 Engine for Caterpillar Built Machines Diagnostic Codes
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Inspect
D11R Track-Type Tractor Engine Valve Lash - Check/Adjust
AD30 Underground Articulated Truck Braking System Service and Parking Brake
980G Wheel Loader Power Train Torque Converter - Assemble - Heavy duty
980H Wheel Loader Power Train Torque Converter (Freewheel Stator) - Disassemble
980H Wheel Loader Power Train Torque Converter (Freewheel Stator) - Assemble
3034 Engine for Caterpillar Built Machines Crankshaft - Remove
D6N Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11R Track-Type Tractor Operation Information
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission - Assemble
2003/03/24 A New Electronic Controller for the Air Inlet Heater Improves the Engine Starting Ability {1090}
980G Wheel Loader Power Train Transmission Planetary - Disassemble - Standard
TH220B, TH330B and TH340B Telehandlers Boom Wear Pad Clearance - Inspect/Adjust
980G Wheel Loader Power Train Transmission Planetary - Assemble - Standard