D6N Track-Type Tractor Machine Systems Bottom Guard - Remove Caterpillar


Bottom Guard - Remove
`
1.1. Removal Procedure
2.1. Front Guard
3.1. Middle Guard
4.1. Rear Guard

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9745     Air/Hydraulic Jack Gp     1    
B     1U-7505     Hydraulic Jack     1    

Front Guard




    Illustration 1g00995193

  1. Position Tooling (B) under front bottom guard (1) .

  1. Remove bolts (2) .

  1. Remove front bottom guard (1). The weight of front bottom guard (1) is approximately 34 kg (75 lb).

Middle Guard




    Illustration 2g00995194

  1. Position Tooling (B) under middle bottom guard (3) .

  1. Remove bolts (4) .

  1. Remove middle bottom guard (3). The weight of middle bottom guard (3) is approximately 82 kg (180 lb).

Rear Guard




    Illustration 3g00985962



    Illustration 4g01226555

  1. Position Tooling (A) under rear bottom guard (5) .

  1. Remove bolts (6) .

  1. Remove rear bottom guard (5). The weight of rear bottom guard (5) is approximately 159 kg (350 lb).

Information System:

Replacement of Implement Pump with Gear Pump{5055, 5084}
980G Wheel Loader Power Train Torque Converter - Disassemble - Heavy Duty
3044C Industrial Engine and Engines for Caterpillar Built Machines Crankshaft
3046 Engine for Caterpillar Built Machines Connecting Rod - Inspect
D6N Track-Type Tractor Machine Systems Battery - Remove and Install
C-9 Engine for Caterpillar Built Machines Diagnostic Codes
3044C Industrial Engine and Engines for Caterpillar Built Machines Cylinder Head - Inspect
D11R Track-Type Tractor Engine Valve Lash - Check/Adjust
3044C Industrial Engine and Engines for Caterpillar Built Machines Gear Group - Inspect
2003/04/21 Correction to Parts Manuals , "175-3094 Clutch and Gear Group (Third and Fourth)" {3061, 3155}
2003/03/24 Correction to Disassembly and Assembly , "Transmission - Assemble" {1408, 3030, 3030}
3046 Engine for Caterpillar Built Machines Flywheel - Inspect
D6N Track-Type Tractor Machine Systems Bottom Guard - Install
938G Wheel Loader and IT38G Integrated Toolcarrier Safety Messages
2003/03/24 Special Instruction, REHS1578, "Installation Instructions for the 9W-1494 Service Meter Kit " Is Available {7478}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement Crankshaft Front Seal - Install
AD30 Underground Articulated Truck Braking System Service and Parking Brake
980G Wheel Loader Power Train Torque Converter - Assemble - Heavy duty
980H Wheel Loader Power Train Torque Converter (Freewheel Stator) - Disassemble
980H Wheel Loader Power Train Torque Converter (Freewheel Stator) - Assemble
3034 Engine for Caterpillar Built Machines Crankshaft - Remove
D6N Track-Type Tractor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
D11R Track-Type Tractor Operation Information
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train Transmission - Assemble