Turbocharger - Remove
`
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
[RENR6437]
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Transfer Pump - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Turbocharger - Install
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Turbocharger - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Turbocharger - Install
1.1. Removal Procedure
Start By:
- Remove the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
Show/hide table
 |
|
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose (2). Disconnect tube assemblies (1) and (3).
Show/hide table
Illustration 2 g00985715 - Remove nuts (4) and remove turbocharger (5).
Show/hide table
| |
| Illustration 1 | g00985714 |
Information System:
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Fuel Transfer Pump - Remove and Install
3176C and 3196 Engines for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
938G Wheel Loader and IT38G Integrated Toolcarrier
Cooling System Coolant Level - Check
D11R Track-Type Tractor
Engine Starting
3046 Engine for Caterpillar Built Machines
Engine Oil Pump
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Gear Motor (Hydraulic Fan) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Gear Motor (Hydraulic Fan) - Disassemble
Rework Procedure for the Brake Release System on a 973 Track-Type Loader (Steel Mill){4257}
938G Wheel Loader and IT38G Integrated Toolcarrier
Operator Controls
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Lift Cylinder - Remove and Install
963C Track-Type Loader Power Train
Cooler Bypass Valve - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Solenoid Valve and Manifold (Ride Control, Head End) - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Turbocharger - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Electric Starting Motor - Remove and Install
AD30 Underground Articulated Truck Hydraulic System
Oil Filter (Pilot)
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Alternator - Remove and Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Refrigerant Compressor - Remove and Install
2003/03/31
Correction to Specifications , "Steering Control Valve" {4307}
3044C Industrial Engine and Engines for Caterpillar Built Machines
Cylinder Block
C4.4 Industrial Engine
Engine Oil Pump - Inspect
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Engine Supplement
Crankshaft Front Seal - Remove
3046 Engine for Caterpillar Built Machines
Flywheel - Inspect
2003/03/24
Correction to Disassembly and Assembly , "Transmission - Assemble" {1408, 3030, 3030}
2003/04/21
Correction to Parts Manuals , "175-3094 Clutch and Gear Group (Third and Fourth)" {3061, 3155}