938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Gear Motor (Hydraulic Fan) - Assemble Caterpillar

Assembly Procedure

Note: Cleanliness is an important factor. Before the assembly procedure, the exterior and the interior of the component should be thoroughly cleaned. This will help to prevent dirt to entering the internal mechanism.

Show/hide table

Illustration 1	g00985561

1. Install seal (17) to the gear motor. Use Tooling (B) in order to install seal (17).
   Show/hide table

   Illustration 2	g00985560

2. Install retaining ring (16) to the gear motor. Use Tooling (A).
   Show/hide table

   Illustration 3	g00985558

3. Install O-ring seal (15) to the gear motor.
   Show/hide table

   Illustration 4	g00985557

4. Install backup ring (14) and seal (13) to thrust plate (12).
   Show/hide table

   Illustration 5	g00985556

5. Install thrust plate (12) to the gear motor.
   Show/hide table

   Illustration 6	g00985553

6. Install drive gear (11) to the gear motor.
   Show/hide table

   Illustration 7	g00985552

7. Install driven gear (10) to the gear motor.
   Show/hide table

   Illustration 8	g00985551

8. Install backup ring (9) and seal (8) to thrust plate (7).
   Show/hide table

   Illustration 9	g00985550

9. Install thrust plate (7) to body (6).
   Show/hide table

   Illustration 10	g00985549

10. Install body (6) to the gear motor.
    Show/hide table

    Illustration 11	g00985547

11. Install O-ring seals (5) to body (6).
    Show/hide table

    Illustration 12	g00985546

12. Install head (2) to the gear motor.

13. Install bolts (4) to head (2).
    Show/hide table

    Illustration 13	g00985545

14. Install O-ring seal (3) to plug (1).
    Show/hide table

    Illustration 14	g00985544

15. Install plug (1) to head (2).

End By:

1. Install the hydraulic fan motor. Refer to Disassembly and Assembly, "Gear Motor (Hydraulic Fan) - Install".