Blower Motor (Air Conditioner, Heater) - Install
`
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
[RENR6081]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Quick Coupler - Remove
OPERATOR STATION
AIR CONDITIONER GP
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Evaporator Coil - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Install
1.1. Installation Procedure
Installation Procedure
- Position fan motor (15) . Install the washers, bolts (14) , and nuts (16) . Tighten bolts (14) to a torque of 12 ± 3 N·m (9 ± 2 lb ft). Tighten nuts (16) to a torque of 8 ± 3 N·m (6 ± 2 lb ft).
Show/hide table
 | |
| Illustration 1 | g00284958 |
- Connect harness assembly (12) and wires (13) .
Show/hide table
 | |
| Illustration 2 | g00284957 |
- Install cover (10) . Install the washers, the bolts and screws (11) .
Show/hide table
 | |
| Illustration 3 | g00284956 |
- Install air filter (9A) (not shown). Install cover assembly (9) . Install control knobs (8) in order to secure the air filter.
Show/hide table
 | |
| Illustration 4 | g00984412 |
- Install cover (7) .
Show/hide table
 | |
| Illustration 5 | g00284954 |
- Install cover (5) , the washers, and bolts (6) .
Show/hide table
 | |
| Illustration 6 | g00284953 |
- Install the insulation and rubber mat (4) on the cab floor.
Show/hide table
 | |
| Illustration 7 | g00984410 |
Show/hide table
 | |
| Illustration 8 | g00984409 |
- Position cover (2) , as shown. Connect harness assembly (3) .
- Position cover (2) and install screws (1) .
- Fill the cooling system. Refer to Operation and Maintenance Manual for the correct procedure.
End By: Install the seat. Refer to Disassembly and Assembly, "Seat - Remove and Install".
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove
3034 Engine for Caterpillar Built Machines
Crankshaft - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Install
2003/03/10
A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Diverter Valve (Quick Coupler) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Serrated Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pressure Reducing Valve (Traction Control System) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Main Control Valve - Install
D10R Track-Type Tractor
Hub Oil (Flexxaire Fan) - Change - If Equipped
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Quick Coupler - Remove
D6R Series II Track-Type Tractor
Bulldozer Blade Tilt Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Quick Coupler - Install
D6R Series II Track-Type Tractor
Bulldozer Blade Lift Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Install
Bench Test Procedure for Hydraulic Piston Pumps{1387, 4306, 5070, 5084}
AD30 Underground Articulated Truck Braking System
Brake Accumulator
AD30 Underground Articulated Truck Braking System
Accumulator Charging Valve (Brake)
AD30 Underground Articulated Truck Braking System
Accumulator Charging Valve (Brake) - Test and Adjust
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Ride Control Accumulator - Remove and Install
950G Series II Wheel Loader, 962G Series II Wheel Loader and IT62G Series II Integrated Toolcarrier Hydraulic System
Pilot Valve (Joystick)