Pilot Operated Hydraulic Control (Joystick) - Install
`
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
[RENR6081]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Install
HYDRAULIC SYSTEM
VALVE GP-PILOT
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Remove
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control - Disassemble
1.1. Installation Procedure
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Position pilot control valve (8) and install nuts (7). Connect harness assemblies (9) and (10).
Show/hide table
Illustration 2 g00984388 - Connect six hose assemblies (6).
Show/hide table
Illustration 3 g00984387 - Position cover assembly (5) and install screws (4).
Show/hide table
Illustration 4 g00984386 - Position plate (3) and install screws (2).
Show/hide table
Illustration 5 g00984384 - Install screws (1).
- Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Capacities (Refill)" and Operation and Maintenance Manual, "Lubricant Viscosities".
Show/hide table
| |
| Illustration 1 | g00984390 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Diverter Valve (Quick Coupler) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Serrated Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pressure Reducing Valve (Traction Control System) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Main Control Valve - Install
D10R Track-Type Tractor
Hub Oil (Flexxaire Fan) - Change - If Equipped
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Selector and Pressure Control Valve (Pilot) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Sweeps - Remove and Install
651E and 657E Wheel Tractor-Scrapers Wheel Scraper Power Train
Scraper Wiring Group
2003/03/10
A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Install
3034 Engine for Caterpillar Built Machines
Crankshaft - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Blower Motor (Air Conditioner, Heater) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Quick Coupler - Remove
D6R Series II Track-Type Tractor
Bulldozer Blade Tilt Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Quick Coupler - Install
D6R Series II Track-Type Tractor
Bulldozer Blade Lift Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Window Wiper and Wiper Motor (Front) - Install
Bench Test Procedure for Hydraulic Piston Pumps{1387, 4306, 5070, 5084}