Sweeps - Remove and Install
`
D6N Track-Type Tractor Machine Systems
[RENR5271]
FRAME AND BODY
SWEEP GP
D6N Track-Type Tractor Machine Systems
Sweeps - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
- Attach a suitable lifting device to sweeps (1).
Show/hide table
Illustration 2 g00984346 - Remove front bolts (2).
Show/hide table
Illustration 3 g00984721 - Remove rear bolts (2).
- Remove sweeps (1). The weight of sweeps (1) is approximately
91 kg (200 lb) .
Show/hide table
Illustration 1 | g00984344 |
- Attach a suitable lifting device to sweeps (1) and position sweeps (1).
Show/hide table
Illustration 5 g00984721 - Install sweeps (1). The weight of sweeps (1) is approximately
91 kg (200 lb) . - Install rear bolts (2). Tighten bolts (2) to a torque of
136 ± 10 N·m (100 ± 7 lb ft) .Show/hide tableIllustration 6 g00984346 - Install front bolts (2). Tighten bolts (2) to a torque of
136 ± 10 N·m (100 ± 7 lb ft) .
Show/hide table
Illustration 4 | g00984344 |
Information System:
651E and 657E Wheel Tractor-Scrapers Wheel Scraper Power Train
Scraper Wiring Group
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Main Control Valve - Remove
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine Mount (Rear) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble
2003/03/10
A Change to the Transmission Cover Requires a New Tube Assembly {3064}
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine Mount (Rear) - Remove
TH210 and TH215 Telehandlers Machine Systems
Trailer Brake Valve (Hydraulic) - Remove and Install
TH210 and TH215 Telehandlers Machine Systems
Diverter Valve - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine - Install
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Fractured Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Install
D6N Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Selector and Pressure Control Valve (Pilot) - Remove and Install
D10R Track-Type Tractor
Hub Oil (Flexxaire Fan) - Change - If Equipped
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Main Control Valve - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pressure Reducing Valve (Traction Control System) - Remove and Install
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Serrated Connecting Rod
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Diverter Valve (Quick Coupler) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Heater Coil - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Install
2003/03/10
A New Dust Ejector Group for the Exhaust Prevents Loading on the Muffler {1068}