Piston Pump (Hydraulic Fan) - Install
`
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
[RENR6081]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble
HYDRAULIC SYSTEM
PUMP GP
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Pump Control Valve (Steering) - Remove and Install
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Disassemble
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Install
1.1. Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install fan pump (10) and install bolts (11).
Show/hide table
Illustration 2 g00984126 - Position bracket assembly (8) to the original location. Install bolts (9). Connect tube assembly (6) and hose assembly (7).
Show/hide table
Illustration 3 g00984123 - Connect hose assemblies (5), (4), and (3). Install tube assembly (2).
Show/hide table
Illustration 4 g00984121 - Install filter (1).
- Fill the implement hydraulic system. Refer to the appropriate Operation and Maintenance Manual for the correct procedure.
- Close the hood.
Show/hide table
| |
| Illustration 1 | g00984143 |
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston Pump (Hydraulic Fan) - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Remove and Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Loader Frame and Rear Frame - Connect
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Vane Pump (Braking) - Remove
3500B and 3500C Marine Engines
Camshaft
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Install
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Install - Fractured Connecting Rod
2003/04/01
New Flash File Software Is Used for Product Link 151/201 {7620}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Piston and Vane Pump (Steering and Implement) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Secondary Steering Pump and Electric Motor - Remove and Install
TH210 and TH215 Telehandlers Machine Systems
Hitch Cylinder - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine - Remove
3034 Engine for Caterpillar Built Machines
Pistons and Connecting Rods - Remove - Fractured Connecting Rod
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine - Install
TH210 and TH215 Telehandlers Machine Systems
Diverter Valve - Remove and Install
TH210 and TH215 Telehandlers Machine Systems
Trailer Brake Valve (Hydraulic) - Remove and Install
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine Mount (Rear) - Remove
2003/03/10
A Change to the Transmission Cover Requires a New Tube Assembly {3064}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Pilot Operated Hydraulic Control (Joystick) - Assemble
TH350B, TH360B, TH460B and TH560B Telehandlers Engine Supplement
Engine Mount (Rear) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Main Control Valve - Remove
651E and 657E Wheel Tractor-Scrapers Wheel Scraper Power Train
Scraper Wiring Group
D6N Track-Type Tractor Machine Systems
Sweeps - Remove and Install