D6N Track-Type Tractor Machine Systems Fuel Tank - Install Caterpillar

Installation Procedure

Show/hide table

Illustration 1	g00984031

1. Apply Tooling (B) to the sealing face of sending assembly (17). Install sending assembly (17). Install bolts (16).
   Show/hide table

   Illustration 2	g00983960

2. Install fittings (15).
   Show/hide table

   Illustration 3	g00983959

3. Position fuel tank (14) on the back of the machine. The weight of fuel tank (14) is approximately 136 kg (300 lb).
   Show/hide table

   Illustration 4	g00983958

4. Remove Tooling (A) from the front of fuel tank (14).
   Show/hide table

   Illustration 5	g00983957

5. Install bolts (13).

6. Repeat Step 5 for the opposite side.
   Show/hide table

   Illustration 6	g00983955

7. Remove Tooling (A) from the rear of the fuel tank.
   Show/hide table

   Illustration 7	g00983954

8. Connect harness assembly (12).
   Show/hide table

   Illustration 8	g00983953

9. Position panel (11) and install screws (10).
   Show/hide table

   Illustration 9	g00983952

10. Use two people in order to position seat (9). The weight of seat (9) is approximately 32 kg (70 lb). Install bolt (8).
    Show/hide table

    Illustration 10	g00983951

11. Install cable strap (7). Connect hoses (6).
    Show/hide table

    Illustration 11	g00983948

12. Install handle (5) and bolts (4).

13. Repeat Step 12 for the remaining handle.

14. Fill the fuel tank. Refer to Operation and Maintenance, "Fuel Tank Water and Sediment - Drain".
    Show/hide table

    Illustration 12	g01224293

15. Position cover (3). Install bolts (2).

16. Install bolts (1).

17. Repeat Step 16 for the opposite side.