Modulating Valve (Transmission Clutch) - Install
`
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
[RENR6068]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Drive Shaft (Center) - Remove and Install
POWER TRAIN
VALVE GP-MODULATING
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Install
1.1. Installation Procedure
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
- Install modulation valve (9) and install bolts (8). Repeat the previous steps for the five remaining modulation valves.
Show/hide table
 | |
| Illustration 1 | g00979535 |
- Position the harness assemblies to the original location. Connect harness assemblies (2), (3), (4), (5), (6), and (7).
Show/hide table
 | |
| Illustration 2 | g00979528 |
- Connect hose assembly (1) .
Show/hide table
 | |
| Illustration 3 | g00979527 |
End By: Install the cab. Refer to Disassembly and Assembly, "Cab - Install".
Information System:
2003/06/02
New Printer Is Used for Caterpillar Payload Control System (PCS) {749P}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Remove
TH350B, TH355B, TH360B and TH460B Telehandlers
Longitudinal Stability Indicator - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Assemble
D6R Series II Track-Type Tractor
Reference Material
D6R Series II Track-Type Tractor
Operation
D5N Track-Type Tractor Power Train
Track Roller Frame - Install
D5N Track-Type Tractor Power Train
Track Roller Frame - Remove
TH220B, TH330B and TH340B Telehandlers
Tire Shipping Pressure
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Torque Converter - Assemble - Fixed
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Transmission - Remove
TH350B, TH355B, TH360B and TH460B Telehandlers
Lifting Capacities
D6R Series II Track-Type Tractor
Heating and Air Conditioning Control
TH220B, TH330B and TH340B Telehandlers
Caterpillar Approved Work Tools
2003/03/10
The Suction Line Filter Group for the Transmission is Relocated {3016, 3067, 3154}
2003/03/10
Explanation of Transmission Oil Temperature Sensors {5574}
980G Series II Wheel Loader Braking System
Hydraulic Oil Contamination - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Drive Shaft (Center) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Control Valve - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer Control Valve - Install
D5N Track-Type Tractor Power Train
Final Drive - Disassemble
D5N Track-Type Tractor Power Train
Final Drive - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems
Hydraulic Tank - Remove