Modulating Valve (Transmission Clutch) - Remove
`
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
[RENR6068]
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Assemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Install
POWER TRAIN
VALVE GP-MODULATING
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Remove
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Install
1.1. Removal Procedure
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| ZZ | 6V-9508 | Face Seal Plug | 1 |
| 6V-9829 | Cap As | 1 | |
Start By:
- Remove the cab. Refer to Disassembly and Assembly, "Cab - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
- Disconnect hose assembly (1) .
Show/hide table
 | |
| Illustration 1 | g00979527 |
- Disconnect harness assemblies (2), (3), (4), (5), (6), and (7). Position the harness assemblies out of the way.
Show/hide table
 | |
| Illustration 2 | g00979528 |
- Remove bolts (8) and remove modulation valve (9). Repeat the previous steps for the five remaining modulation valves.
Show/hide table
 | |
| Illustration 3 | g00979535 |
Information System:
TH350B, TH355B, TH360B and TH460B Telehandlers
Longitudinal Stability Indicator - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Assemble
D6R Series II Track-Type Tractor
Reference Material
D6R Series II Track-Type Tractor
Operation
D5N Track-Type Tractor Power Train
Track Roller Frame - Install
D5N Track-Type Tractor Power Train
Track Roller Frame - Remove
TH220B, TH330B and TH340B Telehandlers
Tire Shipping Pressure
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Relief Valve (Transmission Hydraulic Control) - Disassemble
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Torque Converter - Assemble - Fixed
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train
Transmission - Remove
TH210 and TH215 Telehandlers Power Train
Transfer Gears - Assemble
TH220B, TH330B and TH340B Telehandlers
Specifications
2003/06/02
New Printer Is Used for Caterpillar Payload Control System (PCS) {749P}
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Modulating Valve (Transmission Clutch) - Install
TH350B, TH355B, TH360B and TH460B Telehandlers
Lifting Capacities
D6R Series II Track-Type Tractor
Heating and Air Conditioning Control
TH220B, TH330B and TH340B Telehandlers
Caterpillar Approved Work Tools
2003/03/10
The Suction Line Filter Group for the Transmission is Relocated {3016, 3067, 3154}
2003/03/10
Explanation of Transmission Oil Temperature Sensors {5574}
980G Series II Wheel Loader Braking System
Hydraulic Oil Contamination - Test
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Drive Shaft (Center) - Remove and Install
D6N Track-Type Tractor Machine Systems
Bulldozer Control Valve - Remove
D6N Track-Type Tractor Machine Systems
Bulldozer Control Valve - Install
D5N Track-Type Tractor Power Train
Final Drive - Disassemble