Accumulator Charging Valve (Brake) - Remove and Install
`
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
[RENR6106]
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Front Frame to Rear Frame - Connect
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Brake Accumulator - Remove and Install
BRAKING SYSTEM
CONTROL GP
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Brake Control Valve (Parking) - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Brake Control Valve (Service) - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Accumulator Charging Valve (Brake) - Remove and Install
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Brake Accumulator - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Release the pressure in the hydraulic system. Refer to Disassembly and Assembly, "System Pressure - Release".
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
 |
|
Personal injury can result from hydraulic oil pressure and hot oil. Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system. Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. |
- Disconnect electrical connector (2).
- Disconnect hose assemblies (3) and tube assemblies (4) from accumulator charging valve (1).
- Remove two bolts on the back side of the support which holds the accumulator charging valve (1). Remove accumulator charging valve (1).
Show/hide table
| |
| Illustration 1 | g00911343 |
- Position accumulator charging valve (1). Install two bolts on the back side of the support which holds the accumulator charging valve (1).
- Connect hose assemblies (3) and tube assemblies (4) to accumulator charging valve (1).
- Connect electrical connector (2).
Show/hide table
|
| |
| Illustration 2 | g00911343 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Torque Converter
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Crankshaft Front Seal - Install - Engine in Chassis
814F Wheel Dozer, 815F Soil Compactor and 816F Landfill CompactorEngine Supplement
Crankshaft Front Seal - Remove - Engine in Chassis
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers Longitudinal Stability Indicator System
General Information
2003/01/27
A New Breather May Be Installed on the Fuel Tank in order to Eliminate the Entry of Dirt {1273}
3056E Industrial Engine
Valve Depth - Inspect
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers
MID 039 - CID 0750 - FMI 02
AD30 Underground Articulated Truck Braking System
Service and Parking Brake
2002/08/12
Remote Mounted Purge Manifold Improves Serviceability of the Rear Braking System {4257}
2002/09/09
Proper Installation of Exhaust Manifolds {1059}
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers
MID 039 - CID 0271 - FMI 04
TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, TH560B and TH580B Telehandlers
MID 039 - CID 0271 - FMI 05
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Brake Accumulator - Remove and Install
2002/09/16
Recommendations for Ultra High Frequency (UHF) Radio Mounting Positioning {7301, 7325}
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Pilot Valve (Lift and Tilt) - Remove
902 and 906 Wheel Loaders Power Train
Differential (Standard) - Assemble
902 and 906 Wheel Loaders Power Train
Differential (Standard) - Disassemble
908 Wheel LoaderPower Train
Axle Planetary (Front) - Assemble
908 Wheel LoaderPower Train
Axle Planetary (Front) - Disassemble
908 Wheel LoaderPower Train
Axle Planetary (Rear) - Assemble
814F Wheel Tractor, 815F Soil Compactor and 816F Landfill Compactor Machine Systems
Pilot Valve (Lift and Tilt) - Install
2002/09/09
A New Parking Brake Group Improves Service Life {4267}
966G II and 972G II Wheel Loaders
Service Brake Control
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power Train
Transmission Pump