826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Muffler - Remove and Install Caterpillar


Muffler - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Start By:

  1. Remove the hood.


    Illustration 1g03809217

  1. If necessary, remove insulation from tube assembly (1).

  2. Disconnect tube assembly (1) from the muffler and loosen the clamp from the turbo.

  3. Mark the distance from the muffler support to the end of the muffler for assembly purposes.


    Illustration 2g03798220

  4. Remove four bolts (2), the spacers, and the washers.


    Illustration 3g03798229

  5. Attach a suitable lifting device to muffler (3). The weight of muffler (3) is approximately 96 kg (212 lb). Remove muffler (3).

Installation Procedure

  1. Install muffler (3) in the reverse order of removal.

    1. If replacing the muffler or straps, refer to Muffler and Mounting - Remove and Install for the correct mounting dimensions and strap torque procedures.

    2. Adjust tube assembly (1) and muffler (3) to ensure that the bellows has a minimum amount of misalignment. Failure to properly align the muffler with the bellows, will result in damage to the bellows.

Information System:

906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Event Codes
D5R2 Track-Type Tractor Systems Line Relief and Makeup Valve
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Aftercooler - Remove and Install
D6N Track-Type Tractor Systems Piston Pump (Implement)
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Diagnostic Trouble Codes
950M and 962M Wheel Loaders Mounting and Dismounting
D5R2 and D6R2 Track-Type Tractors Wiring Harness (Short Circuit) - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Aftercooler - Remove and Install
C3.4B Engines DEF Pressure Does Not Respond
3500E Marine Engines Engine Oil Lines
950 GC Wheel Loader Engine Supplement Engine - Remove and Install
986H Wheel Loader Oscillating Axle (Rear) - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Features
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Solenoid Valve - Test - Engine
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Electronic Control Module
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Input Components
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Output Components
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Hood - Remove and Install
621K Wheel Tractor-Scraper Sound Information and Vibration Information
627K Wheel Tractor-Scraper Sound Information and Vibration Information
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System General Information
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System CAN Data Link - Test
2014/08/29 New Power Actuator Group for the Hood Tilt Group Is Now Used on Certain Wheel Loaders {1427, 7251, 7275}
2015/01/23 An Improved Suction Fan Group Is Now Used on Certain 620K and 620H Wheel Tractor-Scrapers {1356}