Aftercooler - Remove and Install
`
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
[UENR3838]
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Cooler - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Aftercooler - Remove and Install
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Combustion Head - Remove and Install - Clean Emissions Module
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Nozzle Heater Harness - Remove and Install - Clean Emissions Module
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Combustion Head - Remove and Install - Clean Emissions Module
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Nozzle Heater Harness - Remove and Install - Clean Emissions Module
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Cooling System Package (Radiator, Fan Group, Aftercooler, Hydraulic Oil Cooler, Refrigerant Condenser) - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Cooling System Package (Radiator, Fan, Fuel Cooler, Aftercooler, Hydraulic Oil Cooler) - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Aftercooler - Remove and Install
1.1. Removal Procedure
2.1. Installation Procedure
Start By:
- Remove the cooling system package.
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove pin assembly (1).
- Remove bolts (2) and the washers. Remove bolts (4) and the washers. Remove fuel cooler (3).
Show/hide table
Illustration 2 g03713586 - Remove bolts (5) and the washers. Remove bolts (7) and the washers.
- Remove clip (6).
Show/hide table
Illustration 3 g03713608 - Disconnect cable (8) from refrigerant condenser (10).
- Remove pin assemblies (9) and remove refrigerant condenser (10).
Show/hide table
Illustration 4 g03713571 - Remove pin assembly (12).
- Remove clip (15).
- Remove bolts (11) and the washers. Remove bolts (14) and the washers. Remove hydraulic oil cooler (13).
Show/hide table
Illustration 5 g03713618 - Remove braces (16).
Show/hide table
Illustration 6 g03713656 - Attach a suitable lifting device to aftercooler (17). The weight of aftercooler (17) is approximately
91 kg (201 lb) . - Remove bolts (18) and the washers.
Show/hide table
Illustration 7 g03713636 - Remove bolts (19) and the washers. Use the suitable lifting device in order to lower and remove aftercooler (17).
Show/hide table
![]() | |
Illustration 1 | g03713565 |
- Install aftercooler (17) in the reverse order of removal.
Information System:
C3.4B Engines
DEF Pressure Does Not Respond
3500E Marine Engines
Engine Oil Lines
950 GC Wheel Loader Engine Supplement
Engine - Remove and Install
986H Wheel Loader
Oscillating Axle (Rear) - Remove and Install
986H Wheel Loader
Final Drive (Planetary) - Assemble
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Engine Oil Cooler - Remove and Install
2014/09/12
The Fender Support Mount Has Been Improved on Certain Wheel Tractor-Scrapers {7050}
D5R2 and D6R2 Track-Type Tractors
Determining Diagnostic Trouble Codes
D5R2 and D6R2 Track-Type Tractors
Electrical Connector - Inspect
D3K2, D4K2 and D5K2 Track-Type Tractors Systems
Implement System
986H Wheel Loader
Final Drive and Wheel - Remove and Install
D6R2 Track-Type Tractor Systems
Calibration Error Codes
D5R2 and D6R2 Track-Type Tractors
Wiring Harness (Short Circuit) - Test
950M and 962M Wheel Loaders
Mounting and Dismounting
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System
Diagnostic Trouble Codes
D6N Track-Type Tractor Systems
Piston Pump (Implement)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Aftercooler - Remove and Install
D5R2 Track-Type Tractor Systems
Line Relief and Makeup Valve
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System
Event Codes
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement
Muffler - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System
Features
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines
Solenoid Valve - Test - Engine
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System
Electronic Control Module
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System
Input Components