950 GC Wheel Loader Engine Supplement Engine - Remove and Install Caterpillar


Engine - Remove and Install
`
1.1. Removal Procedure
2.1. Installation Procedure

Removal Procedure

Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-3145     Load Leveler Gp     1    
6V-3144 Chain As     2    

Start By:

  1. Remove the engine enclosure.
  2. Remove the side panels.


NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.


  1. Turn the battery disconnect switch to the OFF position.

  1. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating R134a for All AVSpare Machines" for the recovery procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.

  1. Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.



    Illustration 1g03713604

  1. Remove hose assemblies (1) .



    Illustration 2g03713615

  1. Remove hose assembly (2) .



    Illustration 3g03713620

  1. Relocate pump assembly (3) .



    Illustration 4g03713625



    Illustration 5g03713687

  1. Disconnect hose assembly (4) and (5). Relocate filter assembly (6) to one side.



    Illustration 6g03713703



    Illustration 7g03713695

  1. Disconnect clamps (7). Remove tube assembly (8).



    Illustration 8g03713709



    Illustration 9g03713721

  1. Disconnect cable assembly (9). Disconnect bracket (10).

  1. Disconnect strap (11).



    Illustration 10g03713725

  1. Disconnect hose assemblies (12) .



    Illustration 11g03713734

  1. Disconnect harness assemblies (13) .



    Illustration 12g03713757



    Illustration 13g03713759

  1. Remove cover (14). Remove bolts (15). Rotate engine to access bolts (15).



    Illustration 14g03713769

  1. Remove bell housing bolts (16).



    Illustration 15g03713780



    Illustration 16g03713784

  1. Remove mounting bolts (17) and (18) .



    Illustration 17g03713796

  1. Attach Tooling (A) and a suitable lifting device to engine (19). The weight of engine (19) is approximately 700 kg (1543 lb). Remove engine (19).

Installation Procedure

  1. Install engine (19) in the reverse order of removal.

Information System:

986H Wheel Loader Oscillating Axle (Rear) - Remove and Install
986H Wheel Loader Final Drive (Planetary) - Assemble
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Engine Oil Cooler - Remove and Install
2014/09/12 The Fender Support Mount Has Been Improved on Certain Wheel Tractor-Scrapers {7050}
D5R2 and D6R2 Track-Type Tractors Determining Diagnostic Trouble Codes
D5R2 and D6R2 Track-Type Tractors Electrical Connector - Inspect
D3K2, D4K2 and D5K2 Track-Type Tractors Systems Implement System
986H Wheel Loader Final Drive and Wheel - Remove and Install
D6R2 Track-Type Tractor Systems Calibration Error Codes
D6R2 Track-Type Tractor Systems Calibrations (Cat ET)
C3.4B Engines DEF Does Not Purge
D3K2, D4K2 and D5K2 Track-Type Tractors Systems Fast Fill Fuel System
3500E Marine Engines Engine Oil Lines
C3.4B Engines DEF Pressure Does Not Respond
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Aftercooler - Remove and Install
D5R2 and D6R2 Track-Type Tractors Wiring Harness (Short Circuit) - Test
950M and 962M Wheel Loaders Mounting and Dismounting
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Diagnostic Trouble Codes
D6N Track-Type Tractor Systems Piston Pump (Implement)
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Aftercooler - Remove and Install
D5R2 Track-Type Tractor Systems Line Relief and Makeup Valve
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Event Codes
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Muffler - Remove and Install
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Electrohydraulic System Features